Cat5e Cable

A Category5e, outdoor, carrier-class shielded cable that features an integrated ESD drain wire, anti-crosstalk divider and secondary shielding. It is rated to provide optimal performance on Gigabit Ethernet networks. Key Features:

24 AWG copper conductor pairs
26 AWG integrated ESD drain wire to prevent ESD attacks and damage
PE outdoor-rated, weatherproof jacket
Multi-layered shielding
Increase performance

Dramatically improve your Ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables

Extreme weatherproof

TOUGHCables have been built to perform even in the harshest weather and environments

ESD damage protection Protect your networks from devastating electrostatic discharge (ESD) attacks.




Increased Performance

TOUGHCable™ dramatically increases your Ethernet link states, speeds and overall performance.




Extreme Weatherproof Design

TOUGHCable™ has been built to perform in even the harshest weather and environments.





ESD Damage Protection

 

TOUGHCable™ protects your networks from devastating electrostatic discharge attacks.


 


Extended Cable Support

 

TOUGHCable™ has been developed to increase power handling performance for extended cable run lengths.






 

TOUGHCable™ Connectors

 

Specifically designed for use with TOUGHCable™, the TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering.

Solid conductor 4 pair U/UTP Cat5e cable with PVC Grey outer sheath Supplied on convenient 100m reels.

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs, together with a strong nylon rip cord are jacketed in a heat resistant PVC material.

Tested to 100 MHz, the guaranteed performance of this cable meets the ANSI/TIA 568C.2 and ISO/IEC 11801 requirements for PS-NEXT, attenuation, return loss, attenuation-to-crosstalk ratio (ACR)and impedance, making it ideal for high-end transmission links supporting today’s networking protocols.

Key Features: Supplied as 100 metre reels for the smaller job
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors
Rip cord for ease of stripping outer sheath
CPR Compliant to Eca Standard
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Rip Cord One Rip Cord Jacket Materials Flame Retardent PVC   Diameter Nominal 5.0 mm Colour Grey RAL 7035 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 100 Metres Reaction to fire class EN 13501-6 Eca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Solid conductor 4 pair Cat5e U/UTP cable with PVC Grey outer sheath.

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs, together with a strong nylon rip cord are jacketed in a heat resistant PVC material.

The printing detail on the sheath, includes the cables part number, specification details and a 305-0 reverse metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Key Features: 305 metres in an easy to pull box
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Rip cord for ease of stripping outer sheath.
Supports Gigabit Ethernet
CPR Compliant to Eca Standard
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Rip Cord One Rip Cord Jacket Materials Flame Retardent PVC   Diameter Nominal 5.0 mm Colour Grey RAL 7035 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Eca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Cat5e Cable  - Solid conductor 4 pair U/UTP cable with low smoke zero halogen outer sheath.
 
Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs, together with a strong nylon rip cord are jacketed in either Purple or Orange low smoke zero halogen material, which complies with the requirements of IEC332-1.

The printing detail on the sheath, includes the cables part number, specification details and a 305-0 reverse metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Key Features:

305 metres in an easy to pull box
Available in a Orange or Purple LSOH Sheath
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Rip cord for ease of stripping outer sheath.
CPR Compliant to Dca Standard
Supports Gigabit Ethernet
Manufactured and tested to ISO 11801, EN 50288-3-1 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)


Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Rip Cord One Rip Cord Jacket Materials LSOH   Diameter Nominal 5.0 mm Colour Orange RAL 2004 Purple RAL 4005 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Dca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Solid conductor 4 pair U/UTP Cat5e cable with External Grade LDPE outer sheath supplied on convenient 100m reels

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are jacketed in a heat and UV, moisture resistant black polyethylene outer sheath, making this cable ideal for external installation. The printing detail on the sheath, includes the cables part number and specification details.

Key Features: Supplied as 100 metre reels for the smaller job
UV and Moisture Resistant Polyethelene Outer Sheath
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Jacket Materials LDPE, External Grade   Diameter Nominal 5.0 mm Colour Black RAL 9011 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 100 Metres Reaction to fire class EN 13501-6 Fca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Solid conductor 4 pair U/UTP Cat5e cable with a black polyethylene outer sheath, for outdoor use

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are jacketed in a heat and UV, moisture resistant black polyethylene outer sheath, making this cable ideal for external installation.

The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box..

Key Features: 305 metres in an easy to pull box
UV and Moisture Resistant Polyethelene Outer Sheath
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Jacket Materials LDPE, External Grade   Diameter Nominal 5.0 mm Colour Black RAL 9011 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Fca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Molex Connected Enterprise Solutions PowerCat C5e 4 Pair U/UTP cable has been designed to support high speed data transmission systems. This cable is part of the PowerCat System range of products designed based on the PowerSum principle of crosstalk measurement and testing. We recommend that the full range of PowerCat products is used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth.

Features & Advantages

Enhanced performance 4 pair LS0H cable
Category 5e compliant
Color coded pairs for ease of termination
305m easy spool box
Reaction to Fire Euroclass: Eca
Technical Information

Conductor Size: 24 AWG Soft Plain Copper
Primary Insulation: Solid Polyethylene
Sheath: LS0H
Sheath Colour: Violet RAL 4005
Nominal O.D.: 5.0mm
NVP: 69%
Operating temperature: -30°C to +60°C
Installation Temperature: -20°C to +50°C
Maximum Pulling Force: 100N

Solid conductor 4 pair F/UTP Cat5e cable with PVC Grey outer sheath.

Each cable consists of 8 colour coded 24AWG polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are wrapped in an aluminium foil tape screen with a solid drain wire and jacketed in a heat resistant PVC rated material. The printing detail on the sheath, includes the cables part number, specification details and sequential metre marking.

Key Features: 305 metres in an easy to pull box
Cat5e 4 pair F/UTP solid cable with 8 colour coded polyethylene insulated conductors
Pairs are wrapped in an aluminium foil tape screen
Drain Wire
Rip cord for ease of stripping outer sheath
CPR Compliant to Eca Standard
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line)     Jacket Materials Flame Retardent PVC   Diameter Nominal 5.0 mm Colour Grey RAL 7035 Construction F/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Eca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Shielded Patch Panel Cat5e FTP Modules

Solid conductor 4 pair F/UTP Cat5e cable with a black polyethylene outer sheath, for outdoor use.

Each cable consists of 8 colour coded polyethylene insulated conductors. These pairs are wrapped in an aluminium foil tape screen with a solid drain wire, jacketed in a heat and UV, moisture resistant black polyethylene outer sheath, making this cable ideal for outdoor installation.

The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Key Features: 305 metres in an easy to pull box
UV and Moisture Resistant Polyethelene Outer Sheath
Cat5e 4 pair F/UTP solid cable with 8 colour coded polyethylene insulated conductors
Drain Wire
Rip cord for ease of stripping outer sheath
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line)     Jacket Materials LDPE, External Grade   Diameter Nominal 5.0 mm Colour Black RAL 9011 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8

Accessories
(sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool

Networking

Cat5e Patch Panels Cat5e Modules

Excel Category 5e Unscreened PVC Cables are manufactured and tested to the ISO 11801, EN 50173 and ANSI/TIA-568-C standards for enhanced performance Category 5 cables. Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths.

These pairs, together with a strong nylon rip cord are jacketed in a heat resistant PVC material. The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

A choice of jacket colour enables departmental or application identification where necessary.

Key Features: Supports Gigabit Ethernet
Choice of Colours
Fast feed box
Sequential metre markings (305-0)


Material & Construction Conductor Materials Cu, bare Size 24 AWG Insulation Materials PE Colour Blue/White Orange/White Green/White Brown/White Rip Cord One Rip Cord Jacket Materials PVC Diameter Nominal 5.2 mm Colour Grey Construction U/UTP No. of Cores 8 Conductor category Class 1 = Solid Reaction-to-fire class according to EN 13501-6 Eca Category 5e Accessories
(sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Excel Category 5e Unscreened Cables are manufactured and tested to the ISO 11801, EN 50173 and ANSI/TIA-568-C standards for enhanced performance Category 5 cables.

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. 

The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Key Features:
Choice of Colours
Supports Gigabit Ethernet
LSOH outer sheath
Fast feed box
Sequential metre markings
Euroclass Dca-s2-d2-a2



Material & Construction Conductor Materials Cu, bare Size 24 AWG Insulation Materials PE Colour Blue/White Orange/White Green/White Brown/White Rip Cord One Rip Cord Jacket Materials LSOH (Copolymer, thermoplastic) Diameter Nominal 5.2 mm Colour Purple, Red, Orange, Green, Blue & Yellow Construction U/UTP No. of Cores 8 Conductor category Class 1 = Solid Reaction-to-fire class according to EN 13501-6 Dca Category 5e

Accessories
(sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool

Networking

Cat5e Patch Panels Cat5e Modules

Ubiquiti TOUGHCable PRO (UISP-Cable-Pro) - 1000 ft

The Ubiquiti TOUGHCable PRO (UISP-Cable-Pro), formerly known as TC-PRO, is a high-performance, outdoor, carrier-class shielded Category 5e cable with an integrated ESD drain wire, designed to enhance your network’s reliability and performance.

Key Features:

Enhanced Performance: Dramatically improves network performance.
Weatherproof: Built to withstand harsh outdoor conditions.
ESD Protection: Provides robust protection against ESD damage.
Multi-layered Shielding: Ensures superior protection and signal integrity.
Length: 1000 ft for extensive coverage.
Protection Against ESD Attacks: ESD attacks are a leading cause of device failures. Protect your network by using a grounded Ubiquiti Power over Ethernet (PoE) adapter along with Ubiquiti TOUGHCable and TOUGHCable Connectors. These components work together to safeguard against ESD attacks and Ethernet hardware damage.

Ubiquiti TOUGHCable Connectors: Specifically designed for use with Ubiquiti TOUGHCables, these connectors are available in packs of 1 or 100 pieces. They offer protection against ESD attacks and Ethernet hardware damage, allowing for rapid field deployment without soldering.

Available Options:

1 pc
4 pcs
10 pcs
20 pcs
100 pcs
For the latest firmware upgrades, please visit the Ubiquiti Firmware page.

Technical Specifications:

Cable Type: CAT5e, Shielded
Ethernet Support: Up to 1 Gbps
Conductor Wire Gauge: 24 AWG
Conductor: Solid Bare Copper
Conductor Diameter: 0.500 ± 0.005 mm
Insulation Type: Solid PE
Insulation Thickness: AVG: 0.26 mm, MIN: 0.25 mm
Insulation Diameter: 1.04 ± 0.03 mm
Separation (Polyester Wrapping): Thick: 0.025 mm, Extent: 20 mm
Anti-Crosstalk Divider: None
Cable Shield (Aluminum Foil): Thick: 0.060 mm, Extent: 18 mm
ESD Drain Wire: 0.4 CCS
Rip Cord: Yes
Jacket Material: PE
Jacket Thickness: AVG: 0.50 mm, MIN: 0.46 mm
Jacket Outer Diameter: 6.0 ± 0.30 mm
Jacket Color: Gray
Reference Standard: ISO/IEC 11801, TIA/EIA568B.2



Increased Performance

TOUGHCable™ dramatically increases your Ethernet link states, speeds and overall performance.




Extreme Weatherproof Design

TOUGHCable™ has been built to perform in even the harshest weather and environments.





ESD Damage Protection



TOUGHCable™ protects your networks from devastating electrostatic discharge attacks.


 


Extended Cable Support

 

TOUGHCable™ has been developed to increase power handling performance for extended cable run lengths.






 

 

TOUGHCable™ Connectors

 

Specifically designed for use with TOUGHCable™, the TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering.

Excel solid Cat5e ethernet cable F/UTP CPR Euroclass Eca are manufactured and tested to ISO 11801, EN 50173 and ANSI/TIA-568-C Cat 5e specifications, 305m boxes. Each cable consists of 8 colour coded solid copper conductors twisted together to form four pairs.

These pairs are wrapped in an aluminium mylar tape screen with a solid 24 AWG drain wire.

The whole cable is produced in PVC sheath which is metre marked and labelled with part code and DoP information.

Features and Benefits

Cat5e solid copper cable
F/UTP overall foil screening
No conductor screening
Outer sheath colour grey (RAL7038)
Reaction-to-fire class according to EN 13501-6: Eca
24 AWG size conductors

Solid conductor 4 pair F/UTP Cat5e cable with LSOH Purple outer sheath.

Each cable consists of 8 colour coded 24AWG polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths.

These pairs are wrapped in an aluminium foil tape screen with a solid drain wire jacketed in a low smoke zero halogen material, which complies with the requirements of IEC332-1. The printing detail on the sheath, includes the cables part number, specification details and sequential metre marking.

Key Features: 305 metres in an easy to pull box
Cat5e 4 pair F/UTP solid cable with 8 colour coded polyethylene insulated conductors.
Pairs are wrapped in an aluminium foil tape screen
LSOH sheath
Drain Wire
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Cu, bare Size 24 AWG Insulation Materials PE Colour Blue/White Orange/White Green/White Brown/White Overall Screening Foil Jacket Materials PVC Diameter Nominal 5.2 mm Colour Violet Construction F/UTP No. of Cores 8 Conductor category Class 1 = Solid Reaction-to-fire class according to EN 13501-6 Dca Category 5e

Accessories
(sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool

Networking

Cat5e Patch Panels Cat5e Modules

The Cat5e 350MHz Solid UTP Cable (Blue) is CMR rated for use in walls, conduit, ceilings, etc. and is packaged as a 1000-foot bulk roll. The cable features a blue PVC jacket, which provides both flexibility and durability, while making it easier to color code network cable connections.

Backed by StarTech.com's Lifetime Warranty.

Features

UL Listed CMR Riser Fire Rating
Rated up to 350Mhz to provide superior performance and bandwidth over the standard 100Mhz Category 5e specifications
Flexible PVC rated jacket
24 AWG solid bare copper conductor
4-pair unshielded twisted pair (UTP) cable
Foot-marked cable
Other Features

Number of Conductors 4 Pair UTP Cable Jacket Material PVC - Polyvinyl Chloride Fire Rating CMR Rated (Riser) Industry Standards Category 5 Wire Gauge 24 AWG Conductor Type Solid Copper Colours Black, White, Grey and Blue.

Excel solid Cat5e ethernet cable U/UTP LSOH CPR Euroclass B2ca are manufactured and tested to ISO 11801, EN 50173 and ANSI/TIA?568?C Cat 5e specifications, 305m boxes. Each cable consists of 8 colour coded solid copper conductors twisted together to form four pairs.

The whole cable is produced in a LSOH sheath which is metre marked and labelled with part code and DoP information.

Features and Benefits

Cat5e Solid Copper Cable
U/UTP No Overall Screening
No conductor screening
Outer sheath colour Violet
Reaction-to-fire class according to EN 13501-6: B2ca
Smoke development class according to EN 13501-6: s1a
Product specifications for these products can be found in the Documentation tab