Structured Cabling

Solid conductor 4 pair Cat5e U/UTP cable with PVC Grey outer sheath.

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs, together with a strong nylon rip cord are jacketed in a heat resistant PVC material.

The printing detail on the sheath, includes the cables part number, specification details and a 305-0 reverse metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Key Features: 305 metres in an easy to pull box
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Rip cord for ease of stripping outer sheath.
Supports Gigabit Ethernet
CPR Compliant to Eca Standard
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Rip Cord One Rip Cord Jacket Materials Flame Retardent PVC   Diameter Nominal 5.0 mm Colour Grey RAL 7035 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Eca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Cat6 Cable - Solid conductor 4 pair UTP cable with low smoke zero halogen outer sheath.
 
Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs, together with a strong nylon rip cord are jacketed in either Purple, Orange Grey or Blue low smoke zero halogen material, which complies with the requirements of IEC332-1. The printing detail on the sheath, includes the cables part number, specification details and a 305-0 reverse metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

Features:

305 metres in an easy to pull box
Available in a Orange, Purple, Grey or Blue LSOH Sheath
Cat6 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Rip cord for ease of stripping outer sheath.
CPR Compliant to Dca Standard
Manufactured and tested to the ISO 11801, EN 50288-3-1 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)


Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Rip Cord One Rip Cord Jacket Materials LSOH   Diameter Nominal 5.9 mm Colour Orange RAL 2004 Purple RAL 4005 Blue RAL 5015 Grey RAL 7035 Construction U/UTP   No. of Pairs 4 Category 6 Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Dca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat6 Patch Panels Cat6 Modules

Excel Category 5e Unscreened PVC Cables are manufactured and tested to the ISO 11801, EN 50173 and ANSI/TIA-568-C standards for enhanced performance Category 5 cables. Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths.

These pairs, together with a strong nylon rip cord are jacketed in a heat resistant PVC material. The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.

A choice of jacket colour enables departmental or application identification where necessary.

Key Features: Supports Gigabit Ethernet
Choice of Colours
Fast feed box
Sequential metre markings (305-0)


Material & Construction Conductor Materials Cu, bare Size 24 AWG Insulation Materials PE Colour Blue/White Orange/White Green/White Brown/White Rip Cord One Rip Cord Jacket Materials PVC Diameter Nominal 5.2 mm Colour Grey Construction U/UTP No. of Cores 8 Conductor category Class 1 = Solid Reaction-to-fire class according to EN 13501-6 Eca Category 5e Accessories
(sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Cat6 Cable - Solid conductor 4 pair UTP cable with low smoke zero halogen outer sheath, CRP Rating Class Cca

Each cable consists of 4 pairs individually wrapped with varying lay lengths.

The printing detail on the sheath, includes the cables part number, specification details and a 305-0 reverse metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box.


Product Features



305 metres in an easy to pull box


Available in Purple


CRP Compliant to Cca Standard – Classification Cca, s1a, d0, a1


Manufactured and tested to ANSI/TIA, ISO/IEC & EN Standards, ANSI/TIA-568.2-D Cat.6, ISO/IEC 11801-1 Edition 1.0 Class E


Fire Test is according to IEC 60332-1-2 and EN 50399, EN 61034-2, EN 60754-2


Sequential reverse metre markings (305-0)


Solid Copper Cores


Outer Sheath: LS0H

Product Specification



Construction and Characteristics

Conductor

Material/Size

Bare Copper / 24AWG

Insulation

Material

PE

Thickness

Nominal: 0.219mm

Diameter

Nominal: 0.967mm

Colours

Blue/White-Blue

Orange/White-Orange

Green/White-Green

Brown/White-Brown

Unaged Elongation

Min. 300%

Unaged Tensile Strength

Min. 1.836 Kgf/mm²

Jacket

Material

LS0H

Thickness

Nominal: 0.55mm

Diameter

Nominal: 6.0mm

Colour

Purple

Unaged Elongation

Min. 125%

Unaged Tensile Strength

Min. 0.918Kgf/mm²

Aging at 100°C for 168hrs

Min. elongation retention: 70%

Min. tensile strength retention: 70%

Electrical Performances

Dielectric Strength of Insulation

2500 V dc or 1500 V ac / 2 Seconds

Insulation Resistance Test

Min. 5000 M?/Km

Conductor Resistance

Max. 9.38 ?/100m at 20°C

Resistance Unbalance

Max. 2%

Capacitance Unbalance

Max. 160 pF/100m

Mutual Capacitance

Max. 5600 pF/100m

Impedance

1~100MHz

100? ± 15%

100~250MHz

100? ± 22%

Attenuation & Near End Cross Talk

Frequency
(MHz)

Attenuation
(dB/100m)

NEXT
(dB), Min.

PSNEXT
(dB), Min.

1MHz

1.9*

65.0*

62.0*

4MHz

3.5*

64.1*

61.8*

10MHz

5.5*

57.8*

55.5*

16MHz

7.6*

56.2*

54.2*

20MHz

7.9*

53.1*

50.7*

31.25MHz

10.0*

50.0*

47.5*

62.5MHz

14.4*

45.1*

42.7*

100MHz

18.6*

41.8*

39.3*

200MHz

27.4*

36.9*

34.3*

250MHz

31.1*

35.3*

32.7*

Solid conductor 4 pair U/UTP Cat5e cable with a black polyethylene outer sheath, for outdoor use

Each cable consists of 8 colour coded polyethylene insulated conductors. These are twisted together to form 4 pairs with varying lay lengths. These pairs are jacketed in a heat and UV, moisture resistant black polyethylene outer sheath, making this cable ideal for external installation.

The printing detail on the sheath, includes the cables part number, specification details and a unique 305-0 metre marking within each box supplied, allowing for quick and easy measurement of cable installed and the amount remaining within the box..

Key Features: 305 metres in an easy to pull box
UV and Moisture Resistant Polyethelene Outer Sheath
Cat5e 4 pair UTP solid cable with 8 colour coded polyethylene insulated conductors.
Supports Gigabit Ethernet
Manufactured and tested to the ISO 11801, EN 50173 & ANSI/TIA-568-C standards
Sequential reverse metre markings (305-0)
Material & Construction Conductor Materials Soft & annealed copper   Size 24 AWG Insulation Materials HDPE Colour Blue/White (Blue stripe-2line) Orange/White (Orange stripe-2line) Green/White (Green stripe-2line) Brown/White (Brown stripe-2line) Jacket Materials LDPE, External Grade   Diameter Nominal 5.0 mm Colour Black RAL 9011 Construction U/UTP   No. of Pairs 4 Category 5e Number of Cores 8 Length 305 Metres Reaction to fire class EN 13501-6 Fca

Accessories
(Sold Separately)

Tools

Universal Stripping Tool IDC Punchdown Tool Networking

Cat5e Patch Panels Cat5e Modules

Manufactured in the UK

Falcons Mini Trunking is the ideal solution for your application and comes with a wide range of dedicated fittings for fast, high quality installations

25 x 40mm Standard PVC Trunking is supplied in packs of 10 and comes in 3 metre lengths.

Benefits:
Wide range of fittings and boxes
Fast Installation
Specifications:

Width: 40mm Height: 25mm Length 3 Metres Pack Quantity: 10 Material: PVC Plastic Colour: White Type of fastening: Non-adhesive

Category 5e UTP modules are standard 25x50mm Euromod size. Each shuttered module is supplied with an ID window and label.

The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings due to its low profile design.

Features

Standard 25x50mm Euromod Size
Low Profile Design
Supports Gigabit Ethernet
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat5e transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2 Standard
Please Note: These modules are designed to fit only into CE Faceplates found Here




 

A Double Gang Faceplate complete with four CE cat6 Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.

Copper Cable Testers / Verifiers That Make Wiremapping Easy

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously whilst TDR (Time Domain Reflectometry) aids troubleshooting and improves

VDV II cable testers / verifiers check the integrity of copper cables commonly found in voice, data or video installations, including telephone wiring, data networks and video/security cabling.

Measures cable length Provides distance to fault (TDR) Identifies wiring errors instantly Determines services running: ISDN, PBX and PoE RJ-11, RJ-12, RJ-45 and COAX ports VDV II Basic

Performs standard tests for copper cabling, including: Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing, Wiremap for Miswires, Split Pairs, Shorts and Opens, Analog Tone Generator, Voltage Protection, Shielded Cable Testing and Single Screen Results

VDV II Basic Contents

Includes: 1 x tester, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide.

Accuracy

The flagship VDV II Pro cable verifier utilises TDR to accurately measure cable length and provide distance to fault information.

TDR's work by injecting a signal into the cable and measuring the time for any signal to be reflected back after encountering changes in impedance caused by cable damage, open and short circuits.

The recorded time is then translated into an accurate distance measurement. TDR helps to pinpoint where cabling faults occur. This speeds up fault finding as well as minimising disruption and potential damage to fixtures and fixings.

Speed

With comprehensive details on faults such as opens, shorts, crossovers and split pairs, the VDV II cable verifier identifies wiring errors instantly.

The integrated RJ-11/RJ-12 (voice), RJ-45 (data) and coax F-Type (video) connectors allow faster testing of most types of low-voltage cables by eliminating the need for separate testers or adapters.

Intelligence

Connection issues are not always associated with cable faults, so VDV II Pro has the capability to help identify service related issues.

By detecting the presence of voltage and checking polarity, VDV II Pro quickly determines which media service is running over the cable, such as ISDN, PBX and PoE (Power over Ethernet) resulting in faster fault diagnosis.

Troubleshooting active Ethernet networks is also made easier with in-built network detection that displays network rate and duplex information.

Furthermore, to prevent potentially costly damage to the tester all VDV II's are smart enough to know when they have been plugged into an outlet where voltage is present.

Voice

Support for 1, 2 or 3-pair RJ11/12 telephone testing cable. Data

Support for 1, 2 or 3-pair RJ11/12 telephone testing cable. Video

Tests coax cable through F-connector interface. TREND AnyWARE Cloud

The new TREND AnyWARE Cloud management system allows real time collaboration between Project Managers and Field Technicians. There is no need for Field Technicians to setup the LanTEK IV / IV-S, Project Managers pre-configure the jobs and tests in the TREND AnyWARE Cloud, eliminating potential mistakes and compressing the time taken to prepare reports for customers and warranties.

Operates anywhere with a web browser

TREND AnyWARE Cloud operates on a PC, Mac and tablet devices (Android and iOS)

Easy to find project files

Attach all project files including cable layout drawings, videos, and photos into the TREND AnyWARE Cloud. Everything you need in one place.

Share reports easier

Use TREND AnyWARE Cloud to share links to the test reports eliminating the need to manually email large attachments.

Reduce training time with WalkMe

TREND AnyWARE Cloud is embedded with the WalkMe digital adoption platform providing proactive, step-by-step guidance on all key tasks.

Team Viewer Live Support

Using the TREND AnyWARE Cloud users can connect to a LanTEK IV / IV-S remotely to troubleshoot failed links, minimising troubleshooting time, increasing collaboration and reducing call-backs.

Easily manage the certifier fleet

Fleet manager allows you to see who has the certifier, when the software was last updated, calibration due date and when the results were last synced. Allowing you to manage tester downtime and ensuring results are transferred back to the office and not lost or deleted.

Reduce training time

The TREND AnyWARE Cloud comes with proactive, step-by-step guidance for all the key features.

Free storage

No need for separate servers or backup systems.

Cable testing you trust. Network testing you need.

The LinkIQ™ Network & Cable Tester is designed to provide trusted cable testing along with network testing professionals need to do their jobs. LinkIQ™ validates cable performance (up to 10 Gig) using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test.

The LinkIQ™ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include, Analog and Digital Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare™ PC.

The LinkIQ™ Network & Cable Tester includes: LinkIQ Tester with remote IDs #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, Intellitone Pro 200 probe and duffle bag carrying case.

Product Highlights

Measure network capacity up to 10 Gig via frequency based measurements
Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
Graphical wiremap and length test to identify common faults that occur with cabling installation
Document work through LinkWare™ PC reporting
Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Network Testing You Need

Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name, port number, and VLAN info.

LinkIQ™ Feature Breakout





RJ45 Port
PASS/FAIL frequency-based measurement results
Touch Screen Color Display
Length measurement shows distance to termination, open or short
Wiremap shows type and location of fault (miswires, split pairs, shorts, breaks)
USB-C port for data export, software updates and charging
Cable “Speedometer” provides bandwidth information up to 10G
Save up to 1000 test results on the unit and export to LinkWare™ PC






Additional Features

Generates Analog or Digital tones compatible with the IntelliTone™ Probe or Pro3000™ to assist in locating cables in a wall or telecommunications room
Blink Port light on switch to help identify the connected switch port
Compatible with MicroScanner™ PoE Remote Identifiers for Ethernet outlet identification
Touch Sensitive gesture-based display
Rechargeable Li-Ion battery
Easy Feature and Network Testing Upgrades via USB-C via LinkWare™ PC
Charging via standard USB-C port