24 Port PoE Switches

30-port Lite Layer 3 Stackable Managed Gigabit PoE Switch

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. With multicast support and enhanced security, they form the ideal Gigabit access layer solution.

Designed For Secure Enterprise And Metro Ethernet Networks

Feature-Rich Unified Image

with powerful L2 and L3 features

6 Embedded 10G Ports

for super versatile network deployment

Scalable and Highly Available

with physical stacking and fault tolerant topologies

Key Features

16 x 100M/1/2.5GBASE-T PoE+ ports + 8 x 100M/1/2.5/5GBASE-T PoE++ ports
2 x 100M/1/2.5/5/10GBASE-T ports and 4 x 10/25G SFP28 ports provide all the uplink capacity your network needs
PoE budget of 740W allows powering of numerous external devices (Up to 960W with dual powers)
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
RIP/RIPngand OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible
Expand capacity in a flash with physical stacking up to 9 units
Smart Fan self-adjusts accordingly to maintain optimal operating temperatures
Support ERPS, Q-in-Q and 6 KV surge protection
Support 60W PoE compliancewith IEEE 802.3bt
Perpetual PoE and Fast PoE support delivers faster and uninterrupted power to connected devices even when the switch is booting
Enhanced Network Reliability

The DGS-3130 Series targets enterprises and metro Ethernet applications, and customers who require a high level of network security and maximum uptime. Ethernet Ring Protection Switching (ERPS), low-latency ERPS recovery for high-speed metro Ethernet ring resilience, and Loopback Detection for network maintenance provide reliable network access for non-stop service.

Comprehensive Security

The DGS-3130 Series provides users with the latest security features such as Multi-layer and Packet Content Access Control Lists (ACL), Storm Control, and IP-MAC-Port Binding (IMPB) with DHCP Snooping. In addition, the DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and easy deployment.

Scalable Flexibility

The DGS-3130 Series allows multiple switches to be combined via two 10G RJ-45 and four 10G SFP+ ports to form a single physical or virtual stack to meet the needs of growing enterprises. This increases redundancy over multiple physical units and simplifies management by allowing all members in the stack to be managed using a single IP address.

Versatile Traffic Management

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority. This optimizes network data, and video and voice transmissions to ensure that sensitive data is always transmitted quickly and reliably.

Features

The HPE Aruba Networking 2930M layer 3 switch series that is easy to deploy and manage with HPE Aruba Networking ClearPass Policy Manager and on-premise with HPE Aruba Networking Airwave.

Simplify with Zero Touch Provisioning and cloud-based HPE Aruba Networking Central support.

Scale with modular 10 chassis stacking and up to 1440W PoE.

Modular 10GbE and 40GbE uplinks and HPE Smart Rate multi-gigabit support.

Models with 24 ports of HPE Smart Rate with IEEE 802.3bz.

High Power PoE models deliver up to 60W of PoE per port.

High-Performance Layer 3 Access Switches

The HPE Aruba Networking 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.

Optimized for the digital workplace with unified management tools such as HPE Aruba Networking ClearPass Policy Manager, Airwave and Central. Provides optimal configuration automatically when connected to HPE Aruba Networking APs for PoE priority, VLAN configuration, and rogue AP containment.

Pay as you grow modular stacking (10 chassis) and modular 10GbE (SFP+) and 40GbE (QSFP+) uplinks. HPE Smart Rate multi-gigabit Ethernet models support high speed APs over existing cabling and upgradeable power supplies allow your network to quickly scale when more PoE is needed.

Robust Layer 3 feature set includes Access OSPF, static and RIP routing, ACLs, Dynamic Segmentation, sFlow, IPv6 with no software licensing required.

Designed with a power ProVision ASIC, the HPE Aruba Networking 2930M supports multiple programmatic interfaces, including REST APIs and Openflow 1.0 and 1.3, to enable automation of network operations, monitoring, and troubleshooting.

Performance and Power at the Edge

The HPE Aruba Networking 2930M Switch Series is designed with a powerful HPE Aruba Networking ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.

Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements.

Plug and play with up to 10 chassis stacking allowing automated failover enhances network resiliency and RPS support delivers power redundancy.

Supports hot swappable and redundant PoE power for wireless access points, cameras and phones and can easily scale to 1440W with choice of power supplies. High power PoE models deliver up to 60W of PoE per port.

Security and Quality of Service You Can Rely On

The HPE Aruba Networking 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliances while protecting your data from both inside and outside attacks.

Flexible authentication options include standards based security protocols such as 802.1X, MAC and Web Authentication, to enhance security and policy-driven application authentication.

Powerful multilevel-access security controls include source-port filtering, RADIUS/TACACS+, SSL, port security, and MAC address lockout.

Dynamic Segmentation provides user and port-based traffic tunneling to an HPE Aruba Networking Mobility Controller or Branch Gateway so that policies can be applied, advanced services can be extended to users and IoT devices, and traffic can be encrypted to protect the network.

Simplify with Integrated Wired/Wireless Management

The HPE Aruba Networking 2930M Series supports HPE Aruba Networking ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.

HPE Aruba Networking Airwave Network Management software provides an on-premise network management platform for wired and wireless network devices. Cloud-based management with Zero Touch Provisioning supported by HPE Aruba Networking Central.

Supports both cloud-based HPE Aruba Networking Central and on-premise HPE Aruba Networking AirWave with the same hardware ensuring change of management platform without ripping and replacing switching infrastructure.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.

Specifications

Dual Core ARM Coretex A9 @ 1016 MHz
1 GB DDR3 SDRAM
Packet buffer size: 12.38 MB and 4.5MB Ingress, 7.785 Egress
4 GB eMMC
Ports & interfaces

(24) RJ-45 autosensing 1/2.5/5GBASE-T PoE Class 6 ports
(1) Uplink module slot, (1) stacking module slot
Data transmission

Latency: 1000 Mb Latency: < 3.1 µs
Latency: 10 Gbps Latency: < 3.4 µs
Throughput: Up to 112 Mpps
Switching capacity: 320 Gbps
Differentiator

Powerful and flexible high density 1U PoE access switch packed with 24 HPE Smart Rate PoE ports supporting high power IEEE 802.3bt Class 6 (up to 60W) per port. Ideal for advanced Wi-Fi deployments. This model has 24x 802.3bz 1/2.5/5GBase-T copper PoE Class 6 ports. This model supports up to 1440W of PoE budget based on selected power supplies (max 2), with power supplies ordered separately.

Overview
Nebula Cloud-managed Layer 3 Enterprise Switch The XGS2220 Series is a family of Layer 3 access Switches that consists of six models, including PoE, Non PoE and Fiber options. Non PoE models offer Gigabit desktop ports for everyday network access; PoE models allow flexible options with larger PoE budgets and a mix of 60 W and 30 W ports to power devices like the latest WiFi 6/6E Wireless Access Points; The Fiber model aims to achieve business connectivity for high fiber port density requirement.

Flexible 10G For Converged Networking Applications On top of four 10G SFP+ uplinks, the XGS2220 Series comes with two additional 10G Multi-Gig RJ 45 ports to offer the flexibility to connect to servers, network storage, or other high speed network devices. Business can operate smoothly with the better extensibility and robust network infrastructure.

Multiple Power Budget options PoE models come with 10 ports of PoE++ (IEEE 802.3bt) offering up to 60 W per port and 16-40 ports of PoE+ (IEEE 802.3at) delivering up to 30 W per port to meet a variety of applications, including the latest generation of Wireless Access Points.

Within the range, the 3 PoE models of 30HP, 54HP and 54FP can offer larger Power budgets of 400 W, 600 W and 960 W respectively, allowing flexibility in powering a full range of PoE devices efficiently for applications like VoIP, surveillance, high density networked AV applications and Zyxel’s compressive WiFi 6/6E AP portfolio.

Nebula, Manage It Your Way! The support of NebulaFlex Pro allows you to easily switch management modes between standalone management and intuitive Nebula cloud managed mode with 1 YEAR Pro Pack bundled. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller.

Anytime, Anywhere with Nebula Mobile App -Easy device onboarding: QR code scan

-At a glance of network status

-Remote control your network

-Reboot AP, Camera by PoE power cycle

-Block clients with unusual traffic

Dedicated Networked AV Mode The XGS2220 series includes a tailor-made networked AV mode when used in standalone mode. You can switch interfaces to simplify the installation of AVoIP with an intuitive wizard that prompts high level requirements for this type of network infrastructure; leveraging from AI intelligence, the switch is then able to remove the complexity by applying all the necessary details to set up a professional AVoIP deployment in minutes.

When deployed in Networked AV mode the switch gives you a dedicated dashboard allowing quick access to the key AV network elements such as IGMP and IP information as well as fast access to configuration functions often associated with AVoIP deployments.

The GS724TPv3 24-Port Gigabit Switch with PoE+ and 2 SFP Ports joins the NETGEAR Standalone Smart Managed Pro Switches family, adding full 24 port PoE+ support for deployment of modern high-power PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a cost-effective switch, with a reasonable PoE power budget of 190W.Going Gigabit and PoE+ Just Got More Cost-Effective!

As a leading provider of network equipment for SMBs, NETGEAR understands the importance of providing great choice of PoE port counts and power budgets that can adapt to the business's needs, whether in the hospitality, catering, education or retail domains.

The GS724TP 24-Port Gigabit Switch with PoE+ and 2 SFP Ports joins the NETGEAR Standalone Smart Managed Pro Switches family, adding full 24 port PoE+ support for deployment of modern high-power PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a cost-effective switch, with a reasonable PoE power budget of 190W.

NETGEAR Smart Managed Pro Switches offer powerful Layer 2 features, great PoE functionality, and enhanced performance and usability. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value: they are purposely designed for converged networks where voice, video, data are all carried on a single network platform.

Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise: the GS724TPv3 supports quiet rack mounting operation with a maximum of 32.4dB even at full power and 25°C (77°F) ambient.

The GS724TPv3 24-Port Gigabit Smart Managed Pro Switch provides a great value, with configurable L2 network features like VLANs and PoE operation scheduling, allowing SMB customers to deploy PoE-based VoIP phones and IP surveillance. Advanced features such as Access Control Lists (ACLs), L2/L3/L4 QoS (DiffServ), LACP link aggregation and Spanning Tree will satisfy even the most advanced small business networks.

Key features include:

Advanced VLAN support for better network segmentation
L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)
Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
Auto "denial-of-service" (DoS) prevention
IGMP Snooping and Querier for multicast optimization
Rate limiting and priority queuing for better bandwidth allocation
Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
Cable test to troubleshoot connection issues
SNMP v1, v2c, v3 and RMON remote monitoring

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively increases available bandwidth on your network
Gigabit Ethernet port for ultra-fast network speeds
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 4
Number of SFP Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE
Network Technology: 1000Base-X, 10/100/1000Base-T
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

Cisco's C1200-24P-4G is a high-performance managed switch designed for optimal network efficiency. With 24 Gigabit ports and 4 SFP slots, this switch ensures seamless connectivity, while its Layer 3 support empowers advanced routing capabilities for a robust and scalable network infrastructure.

Series Features

Get 8 to 48 ports of Gigabit Ethernet connectivity, GE or 10-GE uplinks, and PoE+ support
Plug and play with existing voice, wireless, data, video, and connected networking devices
Provide additional fiber connectivity for higher uplink bandwidth and expanded options with more PoE power budget.
Integrated security helps to prevent unauthorized access and protects your business data.
C1200-24P-4G Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 1G SFP
Power over Ethernet: PoE+ (195W)
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Access Control List (ACL)
Quality of Service (QoS)
IPv4/IPv6 static routing

Network Management:
On-device UI, Cisco Business Dashboard and mobile app
Warranty: Limited lifetime warranty
Unboxing Video

VigorSwitch P2282X - 28-Port L2+ Managed 10G PoE Switch DrayTek VigorSwitch P2282x is a Layer 2+ Managed 10 Gbps switch. It has 24x Gigabit Ethernet LAN ports and 4x SFP+ 10Gbps Fiber links for uplink/downlink. Besides the fixed AC power input, VigorSwitch P2282x also provide DC power input as other power source, which helps to ensure uninterrupted operation and protect connected devices in the event of AC power supply failure.

VigorSwitch P2282x has 24x PoE+ ports with 400W power budget, making it be suitable for more IoT applications integration, including LED lighting, POS (point of sale) computer, motion sensors, IP Cam,…etc. With a 12/54V DC backup power supply, VigorSwitch P2282x can protect critical data from the connected PD devices and maintain uninterrupted network connectivity.

Supporting advanced Layer 3 features, including DHCP Server and VLAN Routing. This enhances network efficiency and ensures uninterrupted LAN connectivity, even when the gateway is offline, which makes it an excellent solution for a network with increasing traffic demands.

Key Specification

24x PoE/PoE+ - 10/100/1000Mbps Ethernet, RJ-45
4x 10G SFP+ - 1000Mbps/10Gbps fiber slot
400 watts - PoE Power Budget
Backup Power - 2x DC redundant power socket
PoE (Power over Ethernet)

Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.

10G SFP+

Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.

Ping Device Check

Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.

ONVIF-Friendly

Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance.

Wire-Speed VLAN Routing

Improve overall network performance by using VigorSwitch P2282x to route the inter-VLAN traffic directly and offload the router.

IPv6 Ready

VigorSwitch P2282x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.

Auto Surveillance & Voice VLAN

Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.

Web-Based GUI

Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status.

IP Conflict Prevention

Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.

Multiple Admin Accounts

Multiple Admin accounts with two levels of administrator privilege.

QoS (Quality of Service)

Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.

Central Switch Management

Set up VLAN easily from the router and get a centralized hierarchy view of the switches.

Product overview

These are times of unprecedented change for small businesses. Consumers are more demanding than ever before. Online transactions have accelerated. While this new promises greater reward, it also requires small businesses to accelerate digital transformation. At the same time, employees are increasingly distributed across remote and office locations, and this trend is likely to continue. You need a network solution that provides fast, reliable access to critical cloud-based business applications across a remote and in-office workforce.

Now you can have a high-performance, business-class network with the Cisco® Business 110 Series Unmanaged Switches. These affordable plug-and-play switches are ideal for small offices, workgroups, departments, and growing offices with limited IT know-how and support.

Cisco Business 110 Series Unmanaged Switches, part of the Cisco Business networking portfolio, are a family of affordable switches that provide Gigabit Ethernet connectivity for your small business network. Available in desktop and rack-mount models, these switches are designed to suit any small business with basic network needs and are optimized for power efficiency.

They provide robust network connectivity your business demands, as well as added reliability with advanced features such as Quality of Service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes. The Cisco Business 110 Series switches bring the proven reliability and investment protection of Cisco networking solutions to your small business.

Cisco Business 110 Series switches provide an easy-to-use solution for your small business network. They offer:

Simple: Cisco Business 110 Series switches work right out of the box, with plug-and-play capability without software installation and configuration. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically. As a standards-based Cisco solution, Cisco Business 110 Series switches are also designed to immediately accommodate all of the devices in your network.
Flexible deployment: Designed for small office spaces, Cisco Business 110 Series switches are available in 5-, 8-, 16-, and 24-ports configurations, providing ultimate flexibility for diverse use cases and deployment scenarios. The Cisco Business 110 Series switches are also available in both compact desktop and rack-mount models. The desktop models offer a wall-mount option for discreet mounting under a desk or on the wall of an office or conference room. All switches have no fans, so they run silently and unobtrusively in any workspace.
High performance: Cisco Business 110 Series switches deliver the performance you need to run your business applications, including bandwidth-intensive cloud applications and video services, and to avoid slow and sluggish networks. They support Gigabit Ethernet speeds, unlocking a new level of capacity and performance in your business network and letting you transfer large files in seconds.
Features

Effectively increases available bandwidth on your network
Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
The desktop installation makes it ideal for deployments outside the wiring closet
With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience
The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed
Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: No
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 2
Number of SFP Slots: 2
Shared SFP Slot: Yes
Network Technology: 1000Base-X
Network Technology: 10/100/1000Base-T
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Twisted Pair, Optical Fiber
Modular: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 2 x Gigabit Ethernet TP/SFP Combo, 12 x Gigabit Ethernet PoE, 12 x Gigabit Ethernet Network

Maximize efficiency and agility with simple Cloud Network GS1915 Series Cloud Switch Compact and Affordable Cloud-based Switch Series The GS1915 Series includes four 8/24-port switches, with or without PoE options. The two PoE models facilitate wide variety of network setups with flexible PoE budget of both 60 W (8EP) and 130 W (24EP) with all PoE ports supporting IEEE 802.3at PoE+. This Series Switches come with useful features and superior performance just with plug-n-play.

Nebula, The Intelligent Cloud Management The GS1915 Series supports free Nebula cloud management. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller. Typical standalone mode is still available for your preference.

Watch the demo video below:

Watch Demo

Network on Your Palm Anytime, Anywhere with the Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


The Nebula Ecosystem Nebula supports a comprehensive range of products from switch, AP, security firewall, to 5G/LTE mobile routers. Bringing you an easy and unified network experience.

GS1915 Series is The Best Choice If You Are… Prosumers Small Business Chain Stores Effortless deployment, unified home network experience
Quality connectivity for growing home IOT devices
Simple and unified network experience
Sturdy network performance for daily business operation
Simple to manage and maintain multiple stores
Flexible to expand networking solution for new store location instantly
Power Devices in Your Network Easily GS1915-8EP and GS1915-24EP support 60W and 130W power budget respectively, ideal for setup just a few more AP and Camera for homes and small businesses. With Nebula App, it’s easy to reset an abnormal camera by power cycling it, even when you’re away.

The D-Link DGS-1250-28XMP 24-Port Gigabit Smart Managed PoE+ Switch with 4 x 10G Uplinks is the latest generation of switches to provide increased Power over Ethernet (PoE) output, high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250-28XMP provides a cost-efficient and flexible solution for expanding any business network. 10G High-Bandwidth Connectivity

All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirement, to mitigate network bottlenecks. 24 1000BASE-T ports
4 10G SFP+ uplink ports
Up to 370W PoE power budget
Layer 2 and Layer 3 Lite features
Industry standard full CLI1, web GUI, console port
Dual software images & Dual configuration files
D-Link Limited Lifetime Warranty
Layer 2 Features

Such as port mirroring, Spanning Tree Procol (STP), RSTP, MSTP, Link Aggregation. QoS & Surveillance Mode

Capabilities like 802.11p Quality of Service, Bandwidth Control, Auto-Voice VLAN, and Surveillance Mode. Layer 3 Lite Features

Including IP interfaces, IPv6 Neighbor Discovery (ND), and IPv4/IPv6 Static Routing. Security controls

Including ARP Spoofing Prevention, port security - up to 64 MAC addresses per port, IMP-Binding, and D-Link Safeguard Engine. Management interfaces

Dedicated RJ-45 console port. Full CLI1, multilingual web GUI, SNMP MIB for remote NMS (D-View 7). Dual configuration files and dual software images Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included. 10-Gigabit Ethernet port

Four 10G SFP+ uplink ports. Backwards compatibility with RJ-45 ports. High PoE budget

Up to 370W Power over Ethernet (PoE) power budget to power more devices. Leading the way with affordable 10 Gigabit connectivity. Deploy the most cost-effective 10G solution as core switches for SMBs and as access switches for Enterprises. Designed with a high port density, high-bandwidth ports to remove bottlenecks, a high PoE power budget for larger deployments, redundancy capabilities to maintain uptime, easy-to-use multilingual web UI management, dedicated console port and full CLI control.

DGS-1250-28XMP
24 x 10/100/1000BASE-T PoE
4 x 10G SFP+ ports
128 GBps switching capacity

 

Easier maintenance, less downtime. Support for STP, RSTP, and MSTP provides redundant links, prevents network loops, increases network reliability and minimises downtime for essential applications. These switches can even withstand temperatures between -5 to 50°C. Dual software images and configuration files allow the switch to quickly change between firmware versions and configurations to minimise downtime 10G connections Each switch in the series has four 10G SFP+ ports, which allows the most suitable media type to be chosen and mitigates network bottlenecks. The flexible uplink connections in both 1G/10G speeds deliver on data-intensive tasks.  

Optimised for Video Surveillance D-Link’s exclusive Surveillance Mode provides a Web UI designed for video surveillance: it gives you an instant snapshot of your topology, makes features easy to access, and simplifies management of your surveillance network. Layer 3 Lite Including IP interfaces, IPv6 Neighbor Discovery (ND), ARP-Snooping Prevention, IGMP and MLD Snooping, LLDP and LLDP-MED. The DGS-1250 series also includes IPv4/IPv6 static routing capabilities for a scalable and more efficient network. QoS The series supports 802.11p Quality of Service to deliver data to devices based on the priority and type of traffic, and bandwidth Control to reduce unwanted network broadcast traffic. And the Auto-Voice and Auto-Surveillance VLAN features allow voice and video traffic to be automatically identified and prioritised.  

Security down to the port level. The D-Link Safeguard Engine helps protect against malicious traffic flooding the network in the event of a malicious attack. The series supports IMP-Binding which is an easy method to control nodes during IP conflicts and auditing issues, and it prevents ‘ARP spoofing’ and 'man-in-the-middle' malicious attacks.

Network security is further reinforced with ARP Inspection, DHCP Snooping, and a host of security and authentication features such as 802.1X port-based authentication, port security for 64 MAC addresses per port. The series also includes network protection functionalities like Access Control List, and DHCP Server Screening that only allows legitimate DHCP Server IP addresses on specific ports.

 

Fewer wires, more PoE power. All DGS-1250 series PoE switches support IEEE 802.3af/at with a high PoE power budget of 370W. This means more power to remote devices through single Ethernet cables without needing nearby power outlets, and results in faster and easier PoE deployments of VoiP phones, wireless APs or network cameras..  

Network management options to suit your business. The DGS-1250 series comes with the intuitive D-Link Network Assistant (DNA) utility for which simplifies the discovery of all devices using the D-Link Discovery Protocol within the same L2 network segment and displays them on screen for instant access. Simultaneous configurations and basic setups of all discovered devices, including password changes and firmware upgrades, can then be done easily.

The series can also be managed through the web-GUI that has 11 selectable languages, or the free, SNMP-supported D-View 7. Each switch includes a dedicated console port, and the full CLI1 provides more control, precision and repeatability.



1 Full CLI support available at end 2019 via firmware update.

The NETGEAR M4350 series is a versatile 1G, 2.5G, 10G, 25G, and 100G solution designed for the edge, the server room, and the core. M4350 delivers nonstop forwarding stacking, spine and leaf, edge to core connectivity for AV and IT networks. In AV environments, the AV User Interface, Engage Controller and AV profiles are certified by 200+ AV manufacturers.

Key Features

24 Gigabit PoE+ ports with 4 10GBASE-X SFP+ uplinks
880W internal power supply providing 648W of PoE budget
1 slot for modular power supply (1+1 redundancy and/or EPS share)
Any APS350Wv1, APS600Wv2, APS920Wv1, or APS2000Wv1 can be used
The PoE budget can reach 720W, when the redundant PoE budget remains 648W
Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover
Layer 3 feature set includes static, policy-based, and dynamic routing
NETGEAR IGMP Plus™, AV User Interface, and Engage Controller speed up AV installations
NETGEAR ProSAFE® Limited Lifetime Hardware Warranty
Lifetime Next Business Day Hardware Replacement
Groundbreaking AV GUI

A simplified user interface makes it easy to assign configuration profiles to each port.

Multicast in an Instant

NETGEAR IGMP Plus™ provides multicast functionality right out of the box for most AV over IP applications.

Automatic Configuration

Auto-trunk and auto-LAG functionality auto connects with other M4350 (and M4250) switches.

Focus On The Event Not Fan Noise

Most models have quiet mode which greatly reduces fan noise, and some models are even fanless.

Designed For AV Over IP Right Out Of The Box

With built-in NETGEAR IGMP Plus™, there's little-to-no setup required for flawless Video over IP delivery. Enable multicasting right out of the box.

The Zyxel XMG1930-30HP NebulaFlex 16-Port Cloud Managed Rackmount 2.5-Gigabit PoE+ Switch is a Lite-L3 Cloud Managed switch. On top of its high-density 24 2.5G ports that serve as a top performance access switch to upgrade from standard Gigabit network, the switch also features 4 10G ports to expand network connection to WiFi 6/6E AP or 10G servers along with 2 additional 10G fibre ports for extensibility and resilience. The XMG1930-30HP supports both PoE+ and PoE++ with a large power budget of 700W offering great flexibility to deploy WiFi 6/6E and WiFi 7 wireless access points.

Key Features

Multi-Gigabit support with 2.5G and 10G ports offering flexibility for high density Multi-Gig deployments.
4 10G uplinks including both copper and fibre options providing extensibility and resilience for networks.
Supports both 802.3bt PoE++ (60 W) and 802.3at PoE+ with a high-power budget of up to 700W to easily connect WiFi 6/6E APs or IoT devices in your network.
Nebula ecosystem offers a unified cloud network experience, from wired, wireless and security gateway.
Access and manage the full feature sets included from the first day of purchase through the local web GUI.
Upgrade network with flexible connection choices

The XMG1930-30HP supports IEEE 802.3bz standard and includes both 2.5G and 10G port options to provide Multi-Gigabit technology on existing wiring infrastructure designed for standard Gigabit, protecting your investments while offering up to 10 times more bandwidth capacity without expensive and disruptive cable upgrades. Each copper port of the new Multi-Gigabit switch is able to automatically detect which speed is needed with the connected device. It’s common for Multi-Gigabit switches to operate at different link speed for each individual ports, so the XMG1930-30HP is designed with a unique 5-colour LED, providing an intuitive indication of connection speed for each individual ports.

Superior PoE paves the way for high performance WiFi 6 APs

Upgrading business wireless infrastructure to WiFi 6/6E requires a reliable network Switch to provide solid backbone services. The XMG1930-30HP comes with eight ports of IEEE 802.3bt (PoE++) offering up to 60 W per port, as well as 20 ports of IEEE 802.3at delivering up to 30W per port to meet a variety of WiFi 6/6E AP adoptions. It is also ready for future WiFi 7 technology deployments. Maximise the performance of the 700W system power budget with a wide range of choices from Zyxel WiFi 6/6E AP family.

NebulaFlex – simply manage it your way!

The XMG1930-30HP supports NebulaFlex technology which provides extended flexibility, especially for those who hesitate to make the jump to cloud networking. You can easily switch network management modes between standalone and the licence-free Nebula cloud management platform. Nebula control centre provides centralised access for Zyxel products; the local web GUI accesses the full feature sets and all configuration options for your switch from the very first release.

The Nebula ecosystem

It’s easy to set up the Switch and other network devices to Nebula through the Web Interface and mobile APP with the visual step-by-step guide. SB/SMB users can take advantage of Nebula to centrally manage and access real-time network information to have effortless control over the XMG1930-30HP, as well as access points, security firewalls, and 5G/LTE mobile routers anywhere, anytime – for an easy and unified network experience without the cost of additional software or hardware controllers.

Smart managed switch design inside and out

Designed as a Smart L2 managed Switch, you can use the user-friendly local web management for more in-depth configuration tasks such as enhanced QoS, Link Aggregation, IPv6, and IPv4/IPv6 Layer 3 static routing without learning any complex command line interface (CLI). Local web management is included in the purchase price of your switch.

*For complete specifications see the documentation tab above.

Cisco's C1300-24P-4G is a robust 24-port Gigabit managed switch equipped with 4x SFP ports, offering seamless connectivity for your network needs. With advanced Layer 3 support, experience heightened performance and efficiency. Elevate your infrastructure with Cisco's trusted reliability and cutting-edge technology.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-24P-4G Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 1G SFP
Power over Ethernet: PoE+ (195W)
Stacking: N/A
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Modular stacking, uplinks and power provide scalability and simplicity for enterprise edge, SMB and branch offices. The 2930M delivers performance and value with support for static, RIP and Access OSPF routing, 10GbE and 40GbE uplinks, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, up to 740W of PoE+, robust QoS, SDN and requires no software licensing.

Key Features: Aruba Layer 3 Switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Tunnel Node, ACLs, SDN, and robust QoS
Advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz), up to 740W PoE+
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning

HPE Aruba 2930M 24G PoE+: 20 Autosensing 10/100/1000 PoE+ ports
Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports
Features:

The Aruba 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
The Aruba 2930M Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.
The Aruba 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliance's while protecting your data from both inside and outside attacks.
The Aruba 2930M Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
Option of dual
Power Supplies Stacking Module
Slot Uplink Slot Additional Ports and Slots

1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB B port for uploading/ downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included)


JL319A
2930M 24G
JL320A
2930M 24G PoE+  JL324A
2930M 24 HPE Smart Rate PoE
Ports 20 Autosensing 10/100/1000 ports 20 Autosensing 10/100/1000 ports 24 Autosensing 1/2.5/5GBaseT ports Switching Capacity 128 Gbps 128 Gbps 320 Gbps Switching Capacity (Including Stacking 128 Gbps 228 Gbps 420 Gbps Throughput 95.2 Gbps 95.2 Gbps 112 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1/2.5/5GBaseT Port Count 24 24 24 Uplink Speed/Media 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports N/A PoE/PoE+ Ports N/A 24 PoE+ 24 PoE+ PoE Power (Max Possible) N/A 740 Watts 860 Watts Management Managed Functionality Layer 3 Dynamic Dimensions 44.25(w) x 32.43(d) x 4.39(h) cm

Lite Lite Layer 3 stackable managed switch for a secure enterprise or metro Ethernet access network.

Adaptable, Bottleneck-Free 10G Business Connectivity

The DGS-3130 Series is a highly versatile Lite Layer 3 stackable switch. Including powerful L2 & L3 features, as well as support for multiple software images, it is highly pliant, capable of accommodating different network deployments.

With network bottlenecks on the rise, the DGS-3130 Series's six 10 Gigabit uplink ports are an ideal solution. Business can flexibly increase their bandwidth with flexibility to incrementally meet growing bandwidth demands.

Highly Reliable

Redundant power supply (RPS) support, Ethernet Ring Protection (ERPS) and 6 kV surge protection on all GE and RJ-45 access ports

Feature-Rich Unified Software

Powerful L2 and L3 features such as Static Route, RIP/RIPng and OSPFv2/v3

Scalable and Highly Available

Supports high bandwidth stacking and fault tolerant topologies

Easy Access Control

Support for 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC)

24 x 10/100/1000BASE-T PoE ports
2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity your network needs
Premium L2 and L3 features effortlessly improve network efficiency and reduce unnecessary data transfer
High redundancy features to provide professional-grade reliability and a longer product life:
Dual power inputs
Ethernet Ring Protection Switching with <50ms recovery time
6 kV surge protection protects the device and those connected from unexpected surges
802.1d/w/s Spanning Tree Protocol avoids potentially network crippling loops
RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible.
A formidable PoE budget of 370 W allows powering of numerous external devices (further expandable to 740 W)
Expand capacity in a flash with physical stacking up to 9 units
80 Gbps per device physical stacking bandwidth
The Smart fan self-adjusts accordingly to maintain optimal operating temperatures
Power Even More Devices

The DGS-3130-30PS model features Power over Ethernet, which compatible devices to be powered by the switch through a standard Ethernet cable. It supports the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, providing up to 30W of power per port. PoE effectively reduces deployment time for PoE devices such as IP cameras, VoIP phones, and access points, and eliminates the cost for additional electrical cabling. The 370W PoE power budget, which can be increased to 740 W when outfitted with the DPS-700 redundant power supply, allow the switches to power even more devices. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages the power feed to IEEE 802.3at PoE+ powered devices for optimal power distribution.

Weather the Storm

The DGS-3130 Series features built-in 6 kV surge protection on all PoE and non-PoE Gigabit Ethernet access ports without needing external surge protection. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. This significantly reduces the chances of equipment being damaged, effectively lowering maintenance costs by minimizing the need for expensive repairs or replacement.

Highly Available. Highly Flexible.

The D-Link DGS-3130 Lite Layer 3 Stackable Managed Switches are a Gigabit access layer solution specifically designed to connect end-users in a secure enterprise or metro Ethernet access network.

The switches support high bandwidth, long distance stacking, with physical stacking of up to 9 units over fiber, increasing available Gigabit ports on demand. This makes them ideal for network administrators who demand agile expansion functionality without having to sacrifice network reliability.

Slash Your Network Downtime

The DGS-3130 Series gives enterprises and organizations a highly reliable network, allowing for maximum business continuity. It has built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms.

Along with a host of essential network reliability features, all switches in the series support an external redundant power supply to ensure your operations continue unimpeded.

Comprehensive Security

The DGS-3130 Series gives your network the protection it deserves with leading-edge security features that handle threats effectively. With built-in IP-MAC-Port Binding, the switches allow administrators to enhance user access control.

Other advanced features like DHCP Snooping let the switches automatically learn and save IP/MAC pairs to the IMPB white list.

Powerful and Unified

Powerful L2 and L3 features such as RIP/RIPng and OSPFv2/v3 come together in an integrated software image. This allows the switches to satisfy a wide range of requirements for different applications – perfect for building the solid and networks.

Manage Network Traffic in a Whole New Way

The DGS-3130 Series implements a rich set of multi-layer QoS/CoS features to prioritize critical network services such as VoIP, video conferences, IPTV, and IP surveillance. With robust features including Traffic Shaping, L2 Multicast, Host-based IGMP/MLD Snooping and ISM VLAN, administrators get a whole new way to manage their traffic that fits their needs.

Flexible Access Control Policies

Strict access control and deployment are made easy with the DGS-3130 switches. All support authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC), and allow individual policies to be assigned to each host after authentication. In addition, the switch also supports Microsoft® NAP (Network Access Protection).

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively reduces downtime with improved network performance
Gigabit Ethernet port for ultra-fast network speeds
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to establish large network
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 24 x Gigabit Ethernet PoE+, 4 x 10 Gigabit Ethernet Expansion Slot
Network Technology: 10/100/1000Base-T, 10GBase-X
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

GS2220 Layer 2+ Managed Switch Designed For Converged Networks Networked AV Now High quality, low latency video distribution is that simple

Industry first tri-mode switch The GS2220 Series is the first managed hybrid switch with Nebula Cloud management, Standalone management, and SNMP.

Powerful L2 features The GS2220 Series has a rich Layer 2 feature set that can shape the traffic for diverse VoIP, video conference and IPTV deployments. Advanced traffic control features of the GS2220 Series such as L2 multicast, IGMP snooping, Multicast VLAN Registration (MVR) provide hotels, businesses, and educational institutions greater agility and more effective traffic management for the converged applications of today.

Tailor-made experience for Networked AV An intuitive wizard that prompts for high level requirement for network infrastructure, follow up with AI-intelligent to apply all the necessary details to setup a professional AVoIP system. With the intuitive graphical status overview of the key AV network elements such as IGMP and IP information, accompany with condensed function menu help you manage and monitor the system with ease.

Manage it your way! The support of Zyxel NebulaFlex Pro allows you to easily switch standalone management and intuitive Nebula cloud management platform with 1-YEAR Pro Pack bundled anytime with just a few simple clicks.

Watch the demo below:

Watch Demo

Anytime, Anywhere with Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


Power your devices with efficiency and energy-saving The PoE models support 802.3at to offer 30W per port along with maximum 375W high-power budget to meet the needs from power-hungry devices. The intelligent consumption mode allows delivery of only the actual power required by devices connected to the switch for better business ROI.

Experience whisper-silent operations This Series includes both fan-less and built-in smart fan models. The smart fan is designed to automatically adjust speed based on device temperature. You can barely hear the sound while the switch is operating.

Flexible port combination The GS2220 Series includes copper ports and combo ports, 50 and 50HP models even come with additional dedicated SFP ports for uplinks. This flexible port combination can fit in every Layer 2 switching applications easily.

Just Connect with Nebula Just connect with a single vendor Resellers, Managed Service Providers (MSPs) and network Administrators will find Simplicity, Scalability, Flexibility, reduced IT risk and reduced costs through Zyxel’s Cloud Networking Management platform, Nebula a single-vendor approach.

Just Connect without the complexity Nebula offers powerful, effortless and scalable network connectivity that works together to remove the complexity and security risks often associated with having a mixed vendor approach to networking.

Launch an entire network in minutes Connect, protect and manage Security, Switch, Wireless and LTE/5G connectivity via our centralized Cloud platform, Nebula.

Just Connect, with an unmatched portfolio Serving customers with over 80 Nebula enabled devices via an ever-growing portfolio, Zyxel is unmatched in its approach to onboarding new and existing products via NebulaFlex. From Deploying a home office to delivering connectivity to distributed network configurations, Zyxel’s Portfolio of Nebula enabled products can accommodate all types of budgets, functionality and scalability for now and for the future.

NETGEAR GS324P 24-port Gigabit Ethernet Unmanaged PoE+ Switch Introducing the NETGEAR GS324P 24-port Gigabit Ethernet Unmanaged PoE+ Switch with 190W PoE budget and 16 ports PoE+. The GS324P gives you a cost-effective and powerful switch with the best cost/PoE budget ratio.

The compact design and quiet operation make the GS324P an ideal cost-effective and future-proof option for any business or home. It comes with desktop and rackmount for flexible placement.

NETGEAR’s unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. GS324P delivers the power the device needs, at the most granular level.

Key Features

24 Gigabit /10/100/1000 Mbps Ports with 16 ports of PoE+
Sixteen (16) PoE+ ports (up to 30W per port)
PoE power budget of 190W
Simple set up with no software to install or configuration needed
Supports desktop, or rackmount placement, and includes all the necessary mounting hardware in the box
NETGEAR’s unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device's needs.
Ideal for noise-sensitive environments
Energy Efficient Ethernet (IEEE 802.3az) standard
Superior network performance at non-blocking rate delivers true Gigabit speed with no compromise
PoE+ Support

Power-Over-Ethernet (PoE) for powering IP Security Cameras, VoIP phones, wireless access points, and other Ethernet-powered devices.

Sixteen (16) PoE+ ports (up to 30W per port) allow for the connection of up to 16 PoE/PoE+ (802.3af and 802.3at) devices (up to a total PoE power budget of 190W). PoE ports may also be used for non-PoE devices.

The flexible mounting system gives you the flexibility to place the GS324P in a desktop environment or mounted in a rack (accessories included).

Key Highlights

16 ports Support PoE+

16 ports supports PoE+ and PoE being able to provide up to 30W per port to any power-hungry device (PTZ Cameras, PoE Lights, PD Switches, Access Points)

PoE Power Autobalance and Allocation Technology

Automatically balances the PoE power based on the device needs independent of PoE class detected

Flexible mounting options

Adapts to your needs and configuration and configuration in any environment. Rackmount, or desktop mounting options

Silent Design

Silent for quiet operation makes it the ideal switch for noise-sensitive environments.

High quality components and Energy Efficiency

Unmanaged Gigabit switches are built with Top Quality components to assure a long life. Unmanaged switches are built to last and rigorously tested to provide the reliability businesses need.

NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.

Simplify Network Deployment and Management for Small Organizations

The Aruba Instant On 1930 switch series features easy-to-use, out-of-the-box, plug-and-play deployment. The series offers a complete portfolio of choices for increased small business flexibility. It consists of seven models including 8G-, 24G-, and 48G-ports with and without class 4 PoE (i.e. PoE+).

The 24- and 48- port models include four SFP/SFP+ transceiver slots that support Gigabit or 10-Gigabit speeds for fiber connectivity. The Aruba Instant On 1930 switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI.

Main Features

Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity.
Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility.
1G/10G SFP+ ports on 24-and 48-port models for fiber connectivity.
Aruba Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely.
Option to manage your switches through local web GUI.
Limited Lifetime Warranty.


Keep Your Business Protected with Integrated Security Features

The Aruba Instant On 1930 switch series supports energy efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation. Enhanced security features such as IEEE 802.1x, and VLANs guard your network from unwanted or unauthorized access.

Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks. Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection.

Deliver High Perfomance

The Aruba Instant On 1930 switch series delivers advanced functionalities including customizable like VLANs, link aggregation, Spanning Tree Protocols, and IEEE 802.1X access control.

8-, 24-, and 48-port configurations with a choice of non-PoE and Class 4 PoE models provides deployment flexibility that fits all small business environment. Class4 PoE options allow to power devices like IP phones, surveillance cameras and access points, without the cost of additional cabling.

The 24- and 48-port models include 1G/10G SFP+ ports for reliable fiber connectivity and other connections across longer distances. The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and chat support for the entire warranty duration.

This switch comes with 1 Year Free Insight Pro Cloud Management The NETGEAR® new generation Gigabit 28 port (24 port copper + 4 port fibre) high powered PoE+Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS728TPPv2 comes with 24 PoE+ ports and a total PoE power budget of 384w.It can be used in any deployment with high-density of power-hungry devices, such as multiple 11ac Wireless Access Point, PTZ cameras and Video IP phones.It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network eff ciency, operational cost savings, and ease of management.

The 28-port Gigabit with PoE switch comes with 4 dedicated Gigabit SFP ports for fibre connectivity. The new generation of Gigabit PoE Smart Switch from NETGEAR is the optimised solution providing the best value at an affordable SMB price point.



GS728TPPv2 : 24 port 1000Base-T Gigabit PoE Smart Switch
4 dedicated SFP ports
24 PoE+ Ports 384W PoE budget and up to 720W with EPS


Switch Comparison

FS728TPv2 FS728TLP GS724TPv2 GS728TPv2 GS728TPPv2 Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Port Speed Fast Ethernet Fast Ethernet Gigabit Gigabit Gigabit Copper  (RJ-45) Ports 24 (4 x Gig Ports) 24 (2 x Gig Ports) 24 24 24 1G SFP Fibre Ports 2  2  2 (dedicated) 4 (dedicated) 4 (dedicated) PoE/PoE+ Ports 24 x PoE 802.3af 12 x PoE 802.3af 24 PoE+ 802.3at 24 PoE+ 802.3at 24 PoE+ 802.3at PoE Total Budget 192W 100W 190W 190W 384W PoE Per Port 15.4W 15.4W 30W 30W 30W Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Switching & Routing L2 Switching L2 Switching L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing Features VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation Dimensions (WxDxH) mm 440 x 257 x 43 440 x 204 x 43 440 x 204 x 43 440 x 257 x 44 440 x 257 x 43 Highlights:

Designed for Converged Network, Big or Small

Gigabit Speed with 24 ports capable of PoE+
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveilliance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR

Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
4 Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - Diff Serv)
Dynamic VLAN assignment for easy user authentication and location-independent access to network

Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillaince
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
PoE Timer for scheduling on/off time of your PoE powered devices.
Smart IT, not Big IT

Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support


  

Cisco's C1300-24FP-4G is a high-performance Managed Switch designed for optimal network functionality. With 24 Gigabit ports and 4 SFP slots, this L3-supported switch ensures seamless connectivity. Elevate your network infrastructure with Cisco's trusted reliability and advanced management capabilities.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-24FP-4G Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 1G SFP
Power over Ethernet: PoE+ (375W)
Stacking: N/A
Fan: 1 Fan
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

The Aruba 2930M Switch Series is designed for digital workplaces optimized for mobile users. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central. Modular stacking, uplinks and power provide scalability and simplicity for enterprise edge, SMB and branch offices. The 2930M delivers performance and value with support for static, RIP and Access OSPF routing, 10GbE and 40GbE uplinks, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, up to 860W of PoE+, robust QoS, SDN and requires no software licensing.

Key Features: Aruba Layer 3 Switch with 10 chassis backplane stacking, static, RIP and access OSPF routing, Tunnel Node, ACLs, SDN, and robust QoS
Advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz), up to 860W PoE+
24 ports of HPE Smart Rate with IEEE 802.3bz
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning

24 HPE Smart Rate PoE+ 1-slot Switch: 
24 Autosensing 1/2.5/5GBaseT ports PoE+
Features:

The Aruba 2930M Switch Series provides performance, security, and ease of use for enterprise edge, SMB, and branch office networks.
The Aruba 2930M Switch Series is designed with a powerful Aruba ProVision ASIC, to enable the mobile campus with low latency, increased packet buffering, and adaptive power consumption.
The Aruba 2930M Switch Series includes security and quality of services (QoS) features to build a network that meets ever-changing corporate policies and compliance's while protecting your data from both inside and outside attacks.
The Aruba 2930M Switch Series supports Aruba ClearPass Policy Manager for unified and consistent policy between wired and wireless users and simplifies implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies.
Option of dual
Power Supplies Stacking Module
Slot Uplink Slot
Additional Ports and Slots

1 Dual Personality (RJ-45 or USB Micro-B) serial console port
1 USB B port for uploading/ downloading files
1 100BASE-T Out of Band Management Port
1 Uplink Slot
1 Stacking Module Slot
2 Power Supply Slots (power supplies not included)


JL319A
2930M 24G
JL320A
2930M 24G PoE+  JL324A
2930M 24 HPE Smart Rate PoE
Ports 20 Autosensing 10/100/1000 ports 20 Autosensing 10/100/1000 ports 24 Autosensing 1/2.5/5GBaseT ports Switching Capacity 128 Gbps 128 Gbps 320 Gbps Switching Capacity (Including Stacking 128 Gbps 228 Gbps 420 Gbps Throughput 95.2 Gbps 95.2 Gbps 112 Gbps Predominant Port Type 1 GbE Gigabit Copper 1 GbE Gigabit Copper 1/2.5/5GBaseT Port Count 24 24 24 Uplink Speed/Media 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports Dual Personality 10/100/1000 BASE-T PoE+ or 100/1000 Mbps SFP Ports N/A PoE/PoE+ Ports N/A 24 PoE+ 24 PoE+ PoE Power (Max Possible) N/A 740 Watts 860 Watts Management Managed Functionality Layer 3 Dynamic Dimensions 44.25(w) x 32.43(d) x 4.39(h) cm

Cisco's C1200-24FP-4X is a high-performance 24-port Gigabit managed switch with an additional 4 10G SFP+ ports for versatile connectivity. Designed for advanced networking, it supports Layer 3 protocols, ensuring efficient and secure data routing. With robust features and Cisco's reliability, it's an ideal choice for businesses demanding seamless and scalable network management.

Series Features

Get 8 to 48 ports of Gigabit Ethernet connectivity, GE or 10-GE uplinks, and PoE+ support
Plug and play with existing voice, wireless, data, video, and connected networking devices
Provide additional fiber connectivity for higher uplink bandwidth and expanded options with more PoE power budget.
Integrated security helps to prevent unauthorized access and protects your business data.
C1200-24FP-4X Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 10G SFP+
Power over Ethernet: PoE+ (375W)
Fan: 1 Fan
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Access Control List (ACL)
Quality of Service (QoS)
IPv4/IPv6 static routing

Network Management:
On-device UI, Cisco Business Dashboard and mobile app
Warranty: Limited lifetime warranty

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively reduces downtime with improved network performance
Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE+
Network Technology: 10/100/1000Base-T, 10GBase-X
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

The Backbone to Embrace the New Era of Multi-Gigabit XMG1930 Series Multi-Gigabit Lite-L3 Smart Managed Switch Nebula Cloud-Managed Multi-Gigabit Switches The XMG1930 series is a family of Multi-Gigabit Lite-L3 Smart Managed switches including 2 models, with and without PoE options. This Series features a high Multi-Gig port density for WiFi 6/6E wireless access points, servers, and workstations. Both models support NebulaFlex, and come with simplicity, useful features and superior performance.

The Ideal Solution To Upgrade Your Network with Extensibility and Resilience There are up to six 10G uplinks including both copper and fiber options which are capable of network expansion and flexible deployment for Service Providers to upgrade network service, as well as 8 PoE++ (60W) ports to adopt WiFi 6/6E and incoming WiFi 7 APs without hassles.

Manage It Your Way! The XMG1930 Series supports free Nebula cloud management. Nebula provides both intuitive web interface and mobile App to deliver a streamlined experience for installation and management of your network, without additional cost for a software or hardware controller. Typical standalone mode is still available for your preference.

Watch the demo video below:

Watch Nebula Demo

Anytime, Anywhere with Nebula Mobile App Easy device onboarding: QR code scan


At a glance of network status


Remote control your network


Reboot AP, Camera by PoE power cycle


Block clients with unusual traffic


The Nebula Ecosystem The support of Zyxel Nebula allows your business to experience a unified cloud network from Switch, AP, Firewall to 5G/LTE routers anytime with just a few simple clicks.

Just Connect with Nebula Just connect with a single vendor Resellers, Managed Service Providers (MSPs) and network Administrators will find Simplicity, Scalability, Flexibility, reduced IT risk and reduced costs through Zyxel’s Cloud Networking Management platform, Nebula a single-vendor approach.

Just Connect without the complexity Nebula offers powerful, effortless and scalable network connectivity that works together to remove the complexity and security risks often associated with having a mixed vendor approach to networking.

Launch an entire network in minutes Connect, protect and manage Security, Switch, Wireless and LTE/5G connectivity via our centralized Cloud platform, Nebula.

Just Connect, with an unmatched portfolio Serving customers with over 80 Nebula enabled devices via an ever-growing portfolio, Zyxel is unmatched in its approach to onboarding new and existing products via NebulaFlex. From Deploying a home office to delivering connectivity to distributed network configurations, Zyxel’s Portfolio of Nebula enabled products can accommodate all types of budgets, functionality and scalability for now and for the future.

Dedicated Networked AV Mode The XMG1930 series includes a tailor-made networked AV mode when used in standalone mode. You can switch interfaces to simplify the installation of AVoIP with an intuitive wizard that prompts high level requirements for this type of network infrastructure; leveraging from AI intelligence, the switch is then able to remove the complexity by applying all the necessary details to set up a professional AVoIP deployment in minutes.

When deployed in Networked AV mode the switch gives you a dedicated dashboard allowing quick access to the key AV network elements such as IGMP and IP information as well as fast access to configuration functions often associated with AVoIP deployments.

* Required an additional license and the FW 4.80 or above version.

The Aruba Instant On 1930 switch series is designed for small and growing businesses that require enhanced performance to support bandwidth-demanding applications. The Aruba Instant On 1930 switch series seamlessly integrates with existing Instant On indoor/outdoor access points and can be centrally managed with the Instant On mobile app onsite or remotely. These cloud-managed layer 2+ Ethernet switches consist of 8-, 24-, and 48-port Class 4 PoE (i.e. PoE+) and non-PoE Gigabit Ethernet models, with 1G SFP slots on 8-port model and 1G/10G SFP+ slots on 24-/48G models for fiber connectivity.

What's New

Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity.
Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility.
1G/10G SFP+ ports on 24-and 48-port models for fiber connectivity.
Aruba Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely.
Option to manage your switches through local web GUI.
Limited Lifetime Warranty.
Simplify Network Deployment and Management for Small Organizations

The Aruba Instant On 1930 switch series features easy-to-use, out-of-the-box, plug-and-play deployment.

The series offers a complete portfolio of choices for increased small business flexibility. It consists of seven models including 8G-, 24G-, and 48G-ports with and without class 4 PoE (i.e. PoE+).

The 24- and 48- port models include four SFP/SFP+ transceiver slots that support Gigabit or 10-Gigabit speeds for fiber connectivity.

The Aruba Instant On 1930 switch series can be deployed using two management modes – Instant On cloud-management (access via mobile app and/or web portal) and the local web GUI.

Keep Your Business Protected with Integrated Security Features

The Aruba Instant On 1930 switch series supports energy efficient Ethernet for lower power consumption and an enhanced feature set for more robust operation.

Enhanced security features such as IEEE 802.1x, and VLANs guard your network from unwanted or unauthorized access.

Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks.

Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection.

Deliver High Perfomance

The Aruba Instant On 1930 switch series delivers advanced functionalities including customizable like VLANs, link aggregation, Spanning Tree Protocols, and IEEE 802.1X access control.

8-, 24-, and 48-port configurations with a choice of non-PoE and Class 4 PoE models provides deployment flexibility that fits all small business environment. Class4 PoE options allow to power devices like IP phones, surveillance cameras and access points, without the cost of additional cabling.

The 24- and 48-port models include 1G/10G SFP+ ports for reliable fiber connectivity and other connections across longer distances.

The switch series is covered by the Limited Lifetime Warranty with 24x7 phone support for 90 days and chat support for the entire warranty duration.

Aruba CX 6100 24-Ports 4SFP+ L3 Managed PoE Switch

Entry-level access switches ideal for branch offices, mid-market enterprises, and SMB networks looking for reliable and convenient access.


Features • Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing

• Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices

• Compact and fanless 12 port model for quiet deployment

• Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit

• Simple deployment with Zero Touch Provisioning

• Software defined ready with REST APIs

• Simplify adds, moves and changes with colorless ports




Why upgrade to CX 6100? Is your network ready to quickly and safely connect new devices? Can it handle new traffic loads? Is it smart enough to help IT more efficiently operate, manage, and secure the network? The next-gen, entry level Aruba CX switch series ensures you can deliver the digital experiences of the future.


The Aruba CX 6100 Switch Series is modern family of entry level access switches ideal for enterprise branch offices and SMB networks. Optimized for reliable, simple and secure access, the CX 6100 switches provide a convenient wired access solution for networks supporting IoT, mobile and cloud applications.

The CX 6100 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully managed layer 2 switch series has convenient built-in high speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless APs, and includes a compact and fanless model ideal for use in quiet work spaces.

The CX 6100 supports management choices that include Web GUI, CLI, cloud-based and on-premise Aruba Central, so you can choose the best fit for your needs today with flexibility to change without replacing hardware. With enhanced access security, traffic prioritization, and IPv6 support, the CX 6100 also simplifies ownership and brings peace of mind with no switch software licensing and a Limited Lifetime Warranty.




Ideal for branch offices, mid-market enterprises, and SMBs The CX 6100 access switches provide the performance, security, and simplicity that you need.



Simple, secure, and reliable

This Layer 2 switch series is ready for simple deployment with plenty of PoE for IoT, fast 10GbE uplinks, and robust security features like ACLs and static routing to help protect your network.

Power and speed for users and IoT

This Layer 2 switch series has convenient, built-in, high-speed uplinks with up to 370W of PoE to support IoT devices such as security cameras and wireless access points.

Cloud-based management

Built on a cloud-native microservices architecture, Aruba Central delivers full-service AI insights, security and unified infrastructure management for campus, branch, remote, and data center networks — all from a single pane of glass. It’s network configuration and operations made simple.

 


Entry-level, reliable, and secure wired access These access switches provide the performance, security, and simplicity that you need, making them ideal for branch offices, mid-market enterprises, and SMB networks.



Enterprise-class layer 2 connectivity

This high performance Layer 2 switch with support for ACLs, robust QoS, static routing, and IPv6 is ready to power your access layer.

PoE and High Speed Uplinks

Convenient built-in 1/10GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices and wireless access points.

Management flexibility

The fully programmable CX 6100 series supports a choice of management, including cloud-based and on-prem Central*, CLI, switch Web GUI, and programmability with AOS-CX operating system and REST APIs.

Quiet and compact 12 port

This fanless 12-port model has four high-speed uplinks, and 139W of PoE to power access points and IoT devices.

 
Full specification and details can be found in the Product Datasheet PDF file

This switch comes with 1 Year Free Insight Pro Cloud Management The NETGEAR® new generation Gigabit 28 port (24 port copper + 4 port fibre) PoE+Smart Switch offers powerful L2 features, better PoE functions, and enhanced performance and usability. The GS728TPv2 comes with PoE capabilities on all ports and supports PoE+ with up to 30W of power budget, providing hardware investment protections so that the switch can support many more PoE powered devices and new higher-powered devices down the road. It is purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network efficiency, operational cost savings, and ease of management.

The 28-port Gigabit with PoE switch comes with 4 dedicated Gigabit SFP ports for fibre connectivity. The new generation of Gigabit PoE Smart Switch from NETGEAR is the optimised solution providing the best value at an affordable SMB price point.



GS728TPv2 : 24 Port 1000Base-T Gigabit PoE+ Smart Switch
4 Dedicated SFP Ports
24 PoE+ ports with 190W PoE Budget

Switch Comparison

FS728TPv2 FS728TLP GS724TPv2 GS728TPv2 GS728TPPv2 Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Port Speed Fast Ethernet Fast Ethernet Gigabit Gigabit Gigabit Copper  (RJ-45) Ports 24 (4 x Gig Ports) 24 (2 x Gig Ports) 24 24 24 1G SFP Fibre Ports 2  2  2 (dedicated) 4 (dedicated) 4 (dedicated) PoE/PoE+ Ports 24 x PoE 802.3af 12 x PoE 802.3af 24 PoE+ 802.3at 24 PoE+ 802.3at 24 PoE+ 802.3at PoE Total Budget 192W 100W 190W 190W 384W PoE Per Port 15.4W 15.4W 30W 30W 30W Power Supply 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed 1 internal PSU, fixed Switching & Routing L2 Switching L2 Switching L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing L2 Switching, L2+ Static IP routing Features VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation VLAN, QoS, Link Aggregation Dimensions (WxDxH) mm 440 x 257 x 43 440 x 204 x 43 440 x 204 x 43 440 x 257 x 44 440 x 257 x 43 Highlights:

Designed for Converged Network, Big or Small

Gigabit Speed with all ports capable of supporting PoE+
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance system
Static routing, helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering
Build a future-proof network with NETGEAR

Solid performance with non-blocking architecture, 8K MAC addresses, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
Comprehensive IPv6 supporting management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network
4 Dedicated SFPs, not only providing fibre uplinks, but also uplink redundancy and failover, improving reliability and availability for network virtualisation
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more EEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - Diff Serv)
Dynamic VLAN ssignment for easy user authentication and location-independant access to network

Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillance
ACL Wizard for a guided tour to set up your network access control
Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
PoE Timer for scheduling on/off time of your PoE powered devices.
Smart IT, not Big IT

Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
Assist with customer deployment with 1-year Free 24x7 Advanced Technical Support

Cisco's C1300-24P-4X is a robust 24-port Gigabit managed switch, featuring 10G SFP+ ports for accelerated data transfers. Enjoy advanced networking capabilities with Layer 3 support, ensuring optimal performance and reliability for your business network.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-24P-4X Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 10G SFP+
Power over Ethernet: PoE+ (195W)
Stacking: Stackable up to 8 units
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

Cisco 350 CBS350-24FP-4X 24 Ports Manageable Ethernet Switch - 3 Layer Supported - Modular - 47.01 W Power Consumption - 370 W PoE Budget - Optical Fiber, Twisted Pair - PoE Ports - Rack-mountable. The Cisco Business 350 Series Switches, part of the Cisco Business line of network solutions, is a portfolio of affordable managed switches that provides a critical building block for any small office network.

Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions. The Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and helps you create a more efficient, betterconnected workforce.

The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.

However, unlike other small business switching solutions that provide managed network capabilities only in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs.

Business applications

Whether you need a basic high-performance network to connect employee computers or a solution to deliver data, voice, and video services, the Cisco 350 Business Series Switches offer a solution to meet your needs. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Secure office connectivity: Cisco Business 350 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other networking devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network uptime, and keep your employees connected and productive.
Unified communications: As a managed network solution, the Cisco Business 350 Series Switches provide the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for businesses. Cisco Business 350 Series Switches have been rigorously tested to help ensure easy integration and full compatibility with these and other products, providing a complete business solution.
Highly secure guest connectivity: Cisco Business 350 Series Switches let you extend highly secure network connectivity to guests in a variety of settings, such as a hotel, an office waiting room, or any other area open to nonemployee users. Using powerful but easy-to-configure security and traffic segmentation capabilities, you can isolate your vital business traffic from guest services and keep guests' network sessions private from each other.
Features

Management capability allows maximum efficiency and with unrestricted control
Conveniently lets you connect two standard Ethernet ports to ensure maximum efficiency
Gigabit Ethernet port for ultra-fast network speeds
Rack mounting enables you to organize wires & secure cables for professional installation
Supports layer 3 switching for enhanced performance and usability
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
PoE+ port to receive data and up to 25.5 W of power on a single cable in places where a power outlet is not available
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 3
Expansion Slot Type: SFP+
Number of Total Expansion Slots: 4
Number of SFP+ Slots: 4
Shared SFP Slot: No
Network Technology: 10GBase-X, 1000Base-T
Ethernet Technology: Gigabit Ethernet, 10 Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE+

Cisco's C1200-24FP-4G is a high-performance Managed Switch designed for superior networking. Boasting 24 Gigabit ports and 4 SFP slots with Layer 3 support, this switch ensures seamless connectivity and efficient data management, making it an ideal choice for businesses prioritizing advanced network performance

Series Features

Get 8 to 48 ports of Gigabit Ethernet connectivity, GE or 10-GE uplinks, and PoE+ support
Plug and play with existing voice, wireless, data, video, and connected networking devices
Provide additional fiber connectivity for higher uplink bandwidth and expanded options with more PoE power budget.
Integrated security helps to prevent unauthorized access and protects your business data.
C1200-24FP-4G Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 1G SFP
Power over Ethernet: PoE+ (375W)
Fan: 1 Fan
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Access Control List (ACL)
Quality of Service (QoS)
IPv4/IPv6 static routing

Network Management:
On-device UI, Cisco Business Dashboard and mobile app
Warranty: Limited lifetime warranty
*Images for illustrative purposes; actual product may differ in appearance.

Unboxing Video

Ubiquiti UniFi USW-Enterprise-24-POE: Power Up Your Network with Blazing Speeds and Advanced Routing

Supercharge your network with the Ubiquiti UniFi USW-Enterprise-24-POE, a high-performance managed switch ideal for enterprise deployments. 

A 24-port, Layer 3 switch with 2.5 GbE PoE+ output. 

Managed Layer 3 switch with (12) 2.5G RJ45 ports with PoE+ for WiFi 6 APs, (12) Gigabit RJ45 ports with PoE+, and (2) 10G SFP+ ports for fiber uplinks.

Configurable Gigabit Layer 3 switch with auto-sensing 802.3at PoE+. It offers (12) 2.5G RJ45 Ethernet ports, (12) 1G RJ45 Ethernet ports, and (2) 10G SFP+ ports, providing 2.5G PoE links to your WiFi 6 APs and 10G fiber uplinks to your network. Features include a 1.3" touchscreen, single-row RJ45 port layout for easy patch panel cable management, and UniFi SmartPower Redundant Power System* (USP-RPS) support for intelligent protection from internal PSU interruption or failure.

Product Features

(12) 2.5 GbE, (12) GbE; all PoE+ ports
(2) 10G SFP+ ports
400W total PoE availability
DC power backup-ready
Layer 3 switching




Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:







 

Omada SG6428XHP is a versatile L3 managed PoE+ switch, offering L3 routing, rapid 10 Gbps connectivity, stacking, and redundant power supplies, ideal for convergence layer applications. It boasts a 720 W PoE budget,* 24× gigabit RJ45 PoE+ ports, 4× 10 Gbps SFP+ slots, and physical stacking. With centralized management, robust security, and comprehensive management features, it is a dependable choice for SMB, enterprise, and ISP networks.

Features

24× Gigabit RJ45 PoE+ ports
4× 10 Gbps SFP+ slots
Up to 720 W total PoE budget*
Physical stacking for built-in redundancy and performance
L3 features: RIP, OSPF, ECMP, VRRP, PIM-DM, DHCP Server/Relay
Security Strategies: ACL, Port Security, DoS Defend, 802.1X
Highly Available with two field-replaceable power supplies,** VRRP, and ERPS
Centralized cloud management via Omada SDN controllers
Standalone management via web, CLI, SNMP, and RMON

Aruba CX 6000 Switch Series Just right for branch offices, mid-market enterprises, and SMBs The CX 6000 switches bring simplicity, reliability, and value to the access layer.

Main Features

Simplify IT operations with modern Layer 2 Gigabit Ethernet switch series that provides entry level, reliable, and convenient wired access connectivity.
Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of access points, client, and IoT devices.
Compact and fanless 12 port PoE model for space-constrained deployments.
Flexibility to manage with Aruba Central, easy to use Web GUI, CLI, or Aruba NetEdit.
Software defined ready with REST APIs.
HPE Limited Lifetime Warranty with no switch software licensing required.
Simple, secure, and reliable This enterprise-class Layer 2 switch series is ready for quick deployment with plenty of PoE, speed, and robust security features to safely connect and power your access points, client devices, and IoT.

Right size for your business Deploy the number of Ethernet ports and PoE power that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models with up to 370W PoE.

Manage it your way No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.

Product Specification

Ports 24x 10/100/1000Base-T ports
4x 1G SFP ports Power Supply Internal (fixed) power supply, fixed fans PoE Budget Up to 370W of Class 4 PoE Dimensions (H) 4.39 cm x (W) 44.2 cm x (D) 26.82 cm (1.73" x 17.4" x 10.56") Weight 4.19 kg (9.24 lbs) Performance System Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 Mpps Management ports 1x USB-C console port
1x USB Type-A host port Mounting Mounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included. Environmental Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)

Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dB Electrical characteristics Frequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5A Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 /CISPR-32, Class A Immunity Generic: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3

Cisco's C1300-24FP-4X is a robust 24-port Gigabit managed switch, featuring 4x 10G SFP+ ports for lightning-fast connectivity. Experience seamless network management and enhanced data routing capabilities with its Layer 3 support, ensuring optimal performance and reliability for your business network.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-24FP-4X Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 10G SFP+
Power over Ethernet: PoE+ (195W)
Stacking: Stackable up to 8 units
Fan: 1 Fan
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

Product overview

From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches, and routers designed and built for Small Business. Managed through Cisco Business Dashboard and mobile app, the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring, and lifecycle management of the network.

Cisco Business 220 Series Smart Switches

The Cisco Business 220 Series are affordable smart switches with ease of use, security, and reliability for business-class networks. With intuitive dashboard, Power over Ethernet (PoE) options, and customizable features, these switches deliver a solid business network within your budget parameters. When you need a business-class network and cost is top priority, Cisco Business 220 Series provides an excellent solution.

Prominent feature | Business Applications

With Cisco Business 220 Series switches, you can not only build an efficient and reliable network to connect the workforce, you can also create advanced solutions to deliver data, voice, and video services on a converged infrastructure. Get the best value for your money by improving the productivity of employees. Possible deployment scenarios include:

Small office networking: The versatility and affordability of the Cisco Business 220 Series family of switches provide an ideal business-class networking foundation for small businesses with limited IT support and budget.
Wireless connectivity: With PoE+ support, and comprehensive security and Quality of Service (QoS) capabilities, Cisco Business 220 Series switches provide a solid foundation to add business-grade wireless to the network. You can easily deploy Cisco Business wireless access points to increase workforce productivity without worrying about power and throughput.
Unified communications: The Cisco Business 220 Series switches provide QoS features to automatically prioritize delay-sensitive traffic to help you easily deploy an IP-based communication solution on a converged network. PoE+ support can enable IP cameras and videophones to be easily added to your current network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for small businesses. Cisco Business 220 Series switches have been rigorously tested to help ensure easy integration and full compatibility with these and other vendor products.
Features

Management capability allows maximum efficiency and with unrestricted control
Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
Effectively increases available bandwidth on your network
Gigabit Ethernet port for ultra-fast network speeds
With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience
Supports optical fibre cable to span longer distances and provided high data transmission rates between servers and network components
Built-in power supply to ensure all components are being supplied with accurate voltage
Features 24 networking ports to meet the requirements of the most demanding workgroups
Specifications

Manageable: Yes
Layer Supported: 2
Expansion Slot Type: SFP (mini-GBIC)
Number of Total Expansion Slots: 4
Number of SFP Slots: 4
Network (RJ-45): Yes
Modular: Yes
Uplink Port: Yes
Total Number of Network Ports: 24
Port/Expansion Slot Details: 4 x Gigabit Ethernet Expansion Slot, 24 x Gigabit Ethernet PoE
Network Technology: 1000Base-X, 10/100/1000Base-T
Ethernet Technology: Gigabit Ethernet
Media Type Supported: Optical Fiber, Twisted Pair

Cisco's C1200-24P-4X is a high-performance Managed Switch, equipped with 24 Gigabit ports and 4 10G SFP+ ports, offering seamless connectivity. With advanced Layer 3 support, this switch ensures robust performance and streamlined management for your business network.

Series Features

Get 8 to 48 ports of Gigabit Ethernet connectivity, GE or 10-GE uplinks, and PoE+ support
Plug and play with existing voice, wireless, data, video, and connected networking devices
Provide additional fiber connectivity for higher uplink bandwidth and expanded options with more PoE power budget.
Integrated security helps to prevent unauthorized access and protects your business data.
C1200-24P-4X Specifications

Network Ports: 24 x 1G
Uplink Ports: 4 x 10G SFP+
Power over Ethernet: PoE+ (195W)
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Access Control List (ACL)
Quality of Service (QoS)
IPv4/IPv6 static routing

Network Management:
On-device UI, Cisco Business Dashboard and mobile app
Warranty: Limited lifetime warranty
Unboxing Video

Upgrade the data paths of your local wired network to information superhighways with the Linksys LGS124P 24-Port Rackmount Business Gigabit PoE+ Switch. Offering 24 gigabit Ethernet auto-sensing ports with wired connection speeds up to 1,000 Mbps, this unmanaged switch lets your small business expand its local network and send large files to servers, drives, and printers at gigabit speeds. Power over Ethernet Plus technology allows you to send power to devices like IP telephones or video surveillance systems through Ethernet cables without having to install separate power supplies to those devices.

Features:

24-port switch with 12 PoE+ ports (ports 1-6 and 13-18) and dedicated PoE power budget of 120 W
Wired connection speed up to 1,000 Mbps
24 Gigabit Ethernet autosensing ports
Quality of Service (QoS) traffic prioritisation
Power over Ethernet Plus (PoE+) support
Easy Plug-and-Play connection
Gigabit performance These unmanaged PoE+ switches offer Gigabit speeds to minimise transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference.


Power where you need it PoE+ support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices.


Plug-and-Play convenience Linksys unmanaged switches offer a quick and easy solution to extend your office network with plug-and-play installation.


Quality of Service (QoS) traffic prioritisation QoS traffic prioritisation gives precedence to particular devices or activities to ensure mission-critical data throughput is maintained regardless of network congestion. Auto-sensing ports automatically optimise speed for each connected device.




Switch Comparison

LGS116 LGS116P LGS124 LGS124P Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+) IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+) Number of Gigabit Ports  16 16 24 24 PoE+ Ports N/A 8 (first 1-8 ports) N/A 12 (ports 1-6 and 13-18) PoE+ Total Budget N/A 80W N/A 120W MAC Address Table Size 8,000 entries 8,000 entries 8,000 entries 8,000 entries Bandwidth 32 Gbps (non-blocking) 32 Gbps (non-blocking) 48Gbps (non-blocking) 48 Gbps (non-blocking) Power Supply 1 External 1 External 1 Internal 1 Internal Quality Of Service 802.1p and DSCP 802.1p and DSCP 802.1p and DSCP 802.1p and DSCP Physical Specifications 288 x 102 x 26 mm 288 x 132 x 26 mm 440 x 201 x 44 mm 440 x 201 x 44 mm Mounting Wall Mount Wall Mount Rack Mount Rack Mount Warranty 5-year warranty 5-year warranty 5-year warranty 5-year warranty Package Contents Linksys LGS116 16-Port Gigabit Ethernet Switch
Power Adapter
Quick Start Guide Linksys LGS124 24-Port Gigabit Ethernet Switch
Power Adapter
Quick Start Guide Linksys LGS116P 16-Port Gigabit Ethernet PoE+ Switch
Power Cord
Quick Start Guide
Rackmount Kit Linksys LGS124P 24-Port Gigabit Ethernet PoE+ Switch
Power Cord
Quick Start Guide
Rackmount Kit   Buy Buy Buy Buy

D-Link’s DGS-1210-28P Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28P uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28P features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28P is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28P is a Smart PoE+ switch with power budgets of 193W that provides 24 PoE-enabled ports with 4 ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28P: 20 x 1000Base-T 802.3af PoE 4 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 193W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

D-Link DGS-1210-24P Gigabit Smart Switch with Fibre Uplinks is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. offering a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210-24P Smart Switch provides functionality, security and manageability for a fraction of the standard cost of ownership.

The DGS-1210-24P is an affordable PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1210-24P is a 24-port Smart PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

Easily manage your entire network with the Web GUI or D-Link Network Assistant using features like automatic switch discovery, batch operations, and more
Innovative Safeguard Engine, ACL, and ARP Spoofing Prevention protect your network from malicious attacks and illegal access
Range of D-Link Green Technology features help save energy usage automatically and reduce costs, without sacrificing performance


DGS-1210-24P:

24 x 1000Base-T / 802.3af PoE

4 x 1GbE SFP


193W PoE budget


Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.



Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.






DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 24 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 193 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 24: Up to 30 W
(Max 193 W) N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

The D-Link DGS-1026MP 26-Port Gigabit Max PoE Switch enables users to easily connect and power PoE-capable devices such as wireless access points (APs), IP cameras, and IP phones. Each of the 24 PoE ports can supply up to 30 W, with a total PoE budget of 370 W.

Features

24 x Gigabit Ethernet ports (4x PoE+ ports)
2 Gigabit Combo Uplink Ports
370W power budget
52 Gbps switching fabric capacity
Plug & play simplicity for easy installation
Hassle-Free Setup

The DGS-1026MP is a plug-and-play device that requires no configuration, so setup is simple and hassle-free. Simply connect the switch to the network and then connect multiple computers, share files and make VoIP calls across the network.



Energy Efficient

To help small businesses save on operating costs, the DGS-1026MP supports IEEE 802.3az Energy Efficient Ethernet (EEE). This feature actively monitors network traffic and automatically puts ports that are not being used into hibernation, powering them on only when they are required.



Power Over Ethernet+

The DGS-1026MP features 24 10/100/1000BASE-T ports that support the IEEE 802.3at PoE+ standard. Each of the 24 PoE ports can supply up to 30 W, with a total PoE budget of 370 W. The PoE usage LEDs further provide real-time feedback on the current PoE power usage on the network and helps plan out the PoE network budget, preventing PoE overloading problems..





Expand Your Network

With 2 x Gigabit combo uplink ports, businesses have additional flexibility their network deployment, offering a choice for upstream or downstream server connections via a fibre or copper interface.

D-Link’s DGS-1210-28MP Gigabit PoE Smart+ Switch with 4 Fibre Uplinks integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility,

The DGS-1210-28MP uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-28MP features a smart fan design that powers on after the switch reaches a certain temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210-28MP is a high power budget PoE-enabled switch for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS- 1210-28MP is a Smart PoE+ switch with power budgets of 370W that provides 24 PoE-enabled ports that support up to 30W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

DGS-1210-28MP: 24 x 1000Base-T 802.3at PoE 4 x 1GbE SFP 370W PoE budget Green Technology

Power saving via the following features: Link Status detection
LED Shut-Off
Port Shut-Off
System Hibernation
Time-based PoE

Security Features
Access Control List secures network
D-Link Safeguard Engine protects CPU from Broadcast/Multicast/Unicast Flooding
Port Security supports 64 MACs per port
ARP Spoofing Prevention
Intuitive Management
D-Link Network Assistant Utility or Web-based GUI
Built-in SNMP MIB for remote NMS (D-View 6.0)
Compact CLI through Telnet
Advanced Features
Auto Surveillance VLAN
Loopback Detection automatically disables a port when a loop is detected
Cable Diagnostics allows administrators to determine cable status
SFP ports for flexibility
Auto MDI/MDIX
Energy saving DGS-1210 switch is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switch offers advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 series switch can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Auto Surveillance VLAN and Voice VLAN The process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart switch. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their high levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.


Exclusive Layer 2 features Equipped with a complete lineup of L2 features, the DGS-1210 series switch includes IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.


Secure your network D-Link's safeguard engine protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1x port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP spoofing prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by man-in-the-middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP server screening feature blocks rogue DHCP server packets from user ports to prevent unauthorised IP assignment.


DGS-1210-24 DGS-1210-24P DGS-1210-28 DGS-1210-28P DGS-1210-28MP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 56 Gbps 56 Gbps 56 Gbps 56 Gbps 56 Gbps 100M/1G Copper  (RJ-45) Ports 24 24 24 24 24 1G SFP Fibre Ports 4 4 4 4 4 PoE/PoE+ Ports N/A 12 N/A 24 24 PoE Standard N/A 802.3af/ 802.3at  N/A 802.3af/ 802.3at  802.3at PoE Budget N/A 85 W N/A 193 W 370 W PoE Capable Ports N/A Ports 1 to 12: Up to 30 W N/A Ports 1 to 4: 802.3at. 
Ports 5 to 24: 802.3af Ports 1 to 24: Up to 30 W Dimensions 441 x 209.9 x 44 mm 441 x 209.9 x 44 mm 440 x 140 x 44 mm 444 x 210 x 44 mm 440 x 250 x 44 mm

The DGS-1510-28P s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2x 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. 

Features:

24 10/100/1000 Mbps PoE+ Ports
Two 10G SFP+ stacking/uplink ports
Two Gigabit SFP Ports
PoE Power Budget - Up to 193W
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28P's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 193W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.

DGS-1510-28P: 24 x 1000Base-T 802.3at PoE 2 x 1GbE SFP 2 x 10GbE SFP+ 193W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

The DGS-1510-28XMP s the next generation of SmartPro switch. It contains 24 10/100/1000 Mbps PoE plus 2 Gigabit SFP ports and 2 10G ports. With its 10G SFP+ ports, the DGS-1510-28P is ideal for deployments in the SME/SMB core with its 10G uplinks connecting with servers equipped with 10G port connectivity. For medium to large scale enterprise deployment, it can serve as a good interconnection between the core switch and edge switch.

The DGS-1510-28P Gigabit Stackable SmartPro Switches with 10G Uplinks is PoE-enabled for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P is a 24-port PoE Switch that provides 24 PoE-enabled ports that can support up to 30 W of power output following the IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Features:

24 10/100/1000 Mbps PoE+ Ports
Four 10G SFP+ stacking/uplink ports
PoE Power Budget - Up to 370W
128 Gbps switching capacity
Extensive Layer 2 features
QoS, bandwidth control
Secure your network
IPv6 ready
Versatile management
Layer 3 traffic management
Energy saving
The DGS-1510-28XMP's 10/100/1000 Mbps ports are PoE-enabled for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at, the DGS-1510-28P supports up to 30W of power output on any particular PoE port up to 370W, providing flexibility in power allocation for a variety of powered devices, including new 802.11ac wireless access points that require 802.3at power for full functionality. Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.


DGS-1510-28XMP: 24 x 1000Base-T 802.3at PoE 4 x 10GbE SFP+ 370W PoE budget
2 x Smart fans Featuring D-Link Green 3.0 technology, the DGS-1510 series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-1510 Series allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1510 Series provide functionality, security, and manageability for a fraction of the standard cost of ownership. 

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured for a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix any models from the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM not only reduces the number of IP address needed in your network but also allow switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for any specialised stacking cables while at the same time removing the distance barriers that typically limit your topology options when using other stacking technology. 

These switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.

The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited to VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches.

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. 

Flexibility and scalability

The DGS-1510 series supports virtual stacking via D-Link's Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology. 


Extensive Layer 2 features

The DGS-1510 series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. 


QoS, bandwidth control

The DGS-1510 series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. 


Secure your network

D-Link's innovative safeguard engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. 


IPv6 ready

The DGS-1510 series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. 


Versatile management

The DGS-1510 series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease. 


Layer 3 traffic management

The DGS-1510 series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only. 


Energy saving

DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles.


 



DGS-1510-20 DGS-1510-28 DGS-1510-28X DGS-1510-28P DGS-1510-28XMP Form Factor Rackmount Rackmount Rackmount Rackmount Rackmount Switching Capacity 76 Gbps 92 Gbps 128 Gbps 92 Gbps 128 Gbps 100M/1G Copper  (RJ-45) Ports 16 24 24 24 24 1G/10G SFP/SFP+ Fibre Ports 2/2 2/2 0/4 2/2 0/4 PoE/PoE+ Ports N/A N/A N/A 24 24 PoE Standard N/A N/A N/A  802.3at  802.3at PoE Budget N/A N/A N/A 193 W 370 W PoE Capable Ports N/A N/A N/A Ports 1 to 24: Up to 30 W Ports 1 to 24: Up to 30 W Dimensions 280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 210 x 44 mm 444 x 210 x 44 mm 440 x 308 x 44 mm  

The HPE 1950-24G-PoE+ JG962A Switch is a 24 Port PoE+ Smart web-managed Gigabit switch with two 10GBASE T copper ports and two SFP+ ports for SFP+/SFP fibre connections, ideal for small business customers needing advanced high-performance connections. True stacking of as many as 4 devices allows them to be logically administered as a single entity. The switches support Layer 3 static routing on IPv4 and IPv6. Other advanced features include ACLs, 802.1X, STP, RSTP, and MSTP. Limited lifetime warranty covers unit, fans and power supplies.

Features:

24-port Smart web-managed Gigabit Ethernet switch with 28 total ports
24 RJ-45 auto-negotiating 10/100/1000 ports
2 10-Gigabit 10GBASE-T and 2-ports 10-Gigabit SFP Ports
24 Ports of PoE+ with a budget of 370W
True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
Layer 3 routing with 32 static routes
Enhanced network security with ACLs and network login
Usability and feature set optimised for smaller networks
Limited Lifetime Warranty
High-level Gigabit with 10GbE Networking for Advanced Small Businesses Each model of the HPE 1950 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches.

Two connections of 10GBASE-T deliver 10GbE over copper Category 6a cabling for simple, affordable, high-bandwidth connections to a maximum distance of 100 meters.

Two SFP+ ports allow for fibre connectivity at various distances, at 1/10GbE speeds, using optional SFP+ 10GbE or SFP Gigabit transceivers.

Aggregate 10GbE connections for even higher bandwidth using Link Aggregation Control Protocol.


Simplified Network Administration Logically group or "stack" as many as four units of the HPE 1950 Switch Series and manage this as a single entity, greatly simplifying network administration. Interconnect stacked units using 10GbE connections, with as much as 40GbE total stacking bandwidth connecting the units.

Use the intuitive web-browser based interface to configure and administer these smart-managed devices.

These devices support SNMP versions 1, 2c and 3, allowing administration of these devices from a remote SNMP-based management platform.

Network Time Protocol facilitates timekeeping across your network so time-based actions and trouble-shooting logs are kept synchronised.

Units will automatically retrieve an IP Address from a DHCP server, allowing for near plug-and-play deployments.


Robust Security to Protect Your Network The HPE 1950 Switch Series lets you use Virtual LANs and access control lists to set bounds on what data can be seen by which users.

Leverage 802.1X with a RADIUS server to ensure only known and authorised users can access your network.

Multiple features guard your network from user or server spoofing and from malicious network-based attacks.

Help secure management traffic using supported SSL/HTTPS encryption and SNMPv3 capabilities.


Resiliency Features to Keep Your Network Running The HPE 1950 Switch Series supports Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards for creating hot-standby recovery links.

Distribute important links across multiple units in a logical stack for added resiliency. Units can even be in different buildings and still be logically stacked.

Devices support two independent primary and secondary operating system flash images for backup and recovery during unit upgrades.


Click on the product images below to be taken to the range of products

Instant Connectivity and Reliable Performance
The NETGEAR Gigabit Unmanaged Switch series helps your business cost-effectively expand your network to Gigabit speeds and higher port counts. The GS524UP joins the series and offers 16 Ultra60 PoE++ ports and 8 PoE+ ports to power high-power PoE devices. With a total PoE power budget of 480W, deploy denser PoE+ and PoE++ devices to a single switch rather than multiple.

The GS524UP is energy efficient, built to last, and rigorously tested to provide the reliability your business needs. 802.1p traffic prioritization and jumbo frame support allow for seamless integration with more sophisticated networks.

Plug and Play - Simple setup with no software or configuration needed


Power-Over-Ethernet - impressive 480W PoE budget with 16 Ultra60 PoE++ ports and 8 PoE+ ports to power wireless AP, 4K/8K IP Cameras, LED lights, IoT devices, and much more


Gigabit Ethernet - 24 auto-sensing 10/100/1000 Mbps Gigabit Ethernet ports with up to 48Gb non-blocking switching


Limited Lifetime Warranty - Next Business Day replacement and 24/7 chat with a NETGEAR expert
Easy Monitoring - Per port LEDs for port activity and speed


Compact and Flexible Form Factor - Small case with internal power supply and whisper-quiet fans, perfect for desktop, wall-mount, or rackmount deployment


PoE Auto-Balance - unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. The switches deliver the power the device needs, at the most granular level.
 



Powerful Ultra60 PoE++

Ideal for powering and connecting 802.11AX wireless access points, 4K/8K IP surveillance cameras, PoE lighting, and high power audio speakers, the GS524UP gives you a highly cost-effective and powerful switch with the best cost/PoE budget ratio.

NETGEAR Ultra60 PoE++ Unmanaged Switches support the latest Energy Efficient Ethernet (IEEE 802.3bt) standard, powerful enough to support devices that require greater power. The GS524UP includes 16 PoE++ ports that can deliver up to 60W of power per port.




PoE Mode

Your business is always changing and growing, but not all your devices may be 802.3bt standard compatible. PoE mode on the GS524UP solves this problem by providing power to both pre-bt and bt standard devices.

GS524UP by default uses 802.3bt standard, only compatible for bt standard devices. 802.3bt Standard Devices: to power bt standard devices, select 802.3bt mode to receive 60W of power. Pre-802.3bt Standard Devices: to power up pre-802.3bt standard products, select the pre-802.3bt mode to receive more than 30W of power. If the GS524UP is set to pre-802.3bt mode but the device is standard 802.3bt, then PoE++ power will not be delivered to the device. The switch will only deliver 802.3af (<15W)

Going Gigabit and PoE+ Just Got More Cost-Effective!

The GS724TPP 24-Port Gigabit Switch with PoE+ and 2 SFP Ports join the NETGEAR Standalone Smart Switches family, adding full 24 port PoE+ support for deployment of modern highpower PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a costeffective switch, with a reasonable PoE power budget of 380W

NETGEAR Smart Switches offer powerful Layer 2 features, great PoE functionality, and enhanced performance and usability. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value: they are purposely designed for converged networks where voice, video, data are all carried on a single network platform.

Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise: the GS724TPP supports quiet rack mounting operation with a maximum of 35.0 dBA (GS724TPP) even at full power and 25°C (77°F) ambient.


Key Features



24 x PoE+ Gigabit ports with 380W PoE budget (GS724TPP)
2 dedicated Gigabit SFP fiber uplink ports
Non-blocking switching with 52Gbps
Flexible rack-mounting option
Advanced VLAN support for better network segmentation
L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling




Switches with Essential L2/L2+ Features for SMB Networks Powerful L2 and L2+/Layer 3 Lite features, great PoE functionality, and enhanced performance and usability optimized for network efficiency, operational cost savings, and ease of management. These switches are the ideal solution even for the most advanced small and medium organizations looking for the best combination of features, performance, and value.



Versatile and easy to manage Smart switches with optional remote/cloud management are configurable and manageable anywhere, anytime. All you need is the NETGEAR Insight management solution for easy setup, monitoring and remote/cloud management of your Insight Managed Switches. Now you can setup, manage and monitor your network from anywhere in the world.



Get switching now, remote/cloud management now or later Purchase your Smart switch now, manage it in local device GUI, decide later when you want to use remote/cloud management with Insight and activate Insight whenever you want



Build a Future-Proof Network with NETGEAR Future-proof with features like: VLANs, Access Control List, L3 Lite static routing, Multicast Groups, IPv6, QoS, Energy Efficient Ethernet (IEEE 802.3az)

Get your network ready for tomorrow with the NETGEAR M4300-28G-PoE+ (GSM4328PA) switch. This cost-effective and versatile powerhouse delivers high-performance Gigabit connectivity to both small and medium businesses, ideal for campus LANs and mid-size organization networks.

Boost Performance and Efficiency:



24x Gigabit Ethernet ports: Experience reliable and speedy connectivity for your devices.
PoE+ support: Power up Wi-Fi access points, VoIP phones, IP cameras, and more with up to 30 watts per port.
Advanced Layer 2/3/4 features: Implement robust capabilities like policy-based routing, RIP, VRRP, OSPF, and PIM, without additional licenses.
Innovative stacking: Build a resilient and scalable network with mixed 1GbE and 10GbE stacking, featuring nonstop forwarding and hitless failover.


Future-proof Your Investment:

SDN-ready OpenFlow 1.3 support: Embrace the future of network control and adapt to your evolving needs.

Mixed 1GbE and 10GbE stacking: Protect your investment by seamlessly integrating new 10GbE devices into your existing infrastructure.

Comprehensive security: Implement robust safeguards with advanced L2/3/4 features like malicious code detection and DoS attack prevention.

Multi-vendor Auto-iSCSI capabilities: Simplify virtualization with effortless iSCSI configuration.

Effortless Management and Control:

Flexible management options: Choose from industry-standard CLI, web GUI, or NMS300 platform for seamless control and monitoring.

Auto-installation: Streamline deployment with automatic firmware and configuration file upload.

Dual firmware image: Update firmware with minimal service disruption.

Extensive warranty: Gain peace of mind with a lifetime hardware warranty, next business day hardware replacement, and 24x7 technical support.

The NETGEAR M4300-28G-PoE+ is the perfect solution for businesses looking to power up their network with advanced capabilities and robust security, all at a cost-effective price point. Order yours today and unlock the full potential of your network!

The NETGEAR M4300-28G-PoE+ (GSM4328PB) 24-port Layer 3 managed stackable 10-Gigabit switch is part of the Intelligent Edge Switch solution that combines the latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point. This NETGEAR M4300-28G-PoE+ (GSM4328PB) switch offers twenty-four (24) 10-Gigabit Ethernet ports, two (2) 10-Gigabit copper, and two (2) 10-Gigabit SFP+ ports, making it ideal for a small or medium size business to deploy a 10GbE network that is ready for today, and tomorrow technology. NETGEAR M4300-28G-PoE+ (GSM4328PB) is the ideal partner for the latest 802.11ac WiFi by ensuring through put isn't restricted and data flows easily between connected devices.

Key FeaturesCost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organisations networks
Power over Ethernet (PoE+) up to 30 watts per port with hot swap, redundant power supplies and full provisioning.
Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
Up to 384 (Gigabit) ports, or 384 (10 Gigabit) ports, or a combination of both in a single logical switch
Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection
SoftwareAdvanced classifier-based, time-based hardware for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritisation
Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channelling
Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
Comprehensive IPv4/IPv6 static and dynamic routing including Proxy ARP, OSPF, Policy-based routing and automatic 6-to-4 tunnelling
Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 ASM and SSM Proxy and Control Packet Flooding protection
High performance IPv4/IPv6 multicast routing with PIM timer accuracy and unhandled PIM (S,G,rpt) state machine events transitioning
Advanced IPv4/IPv6 security implementation including malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks
Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimisation
AvailabilityVertical or horizontal flexible stacking with management unit hitless failover and nonstop forwarding across operational stack members
Spine and leaf architecture with every leaf switch (1G access switches) connecting to every spine switch (distributed 10G "core" switches)
Stacking and distributed link aggregation allow for multi-resiliency with zero downtime and load balancing capabilities
Link Dependency new feature enables or disables ports based on the link state of different ports
Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures
ManagementDHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
Service port for out-of-band Ethernet management (OOB)
Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
Standard USB port for local storage, logs, configuration or image files
Dual firmware image and configuration file for updates with minimum service interruption
Industry standard command line interface (CLI) for IT admins used to other vendors commands
Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
Single-pane-of-glass NMS300 management platform with mass-configuration support
NETGEAR WarrantyThis product is backed by a NETGEAR ProSafe Lifetime Hardware Warranty.
Lifetime Next Business Day Hardware Replacement.
ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).
Standard warranty: Lifetime



The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack.

Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

Best-in-class stacking

M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)

High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption

Higher flexibility

Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization

10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds

Lower complexity

Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license

DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

Investment protection

Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks

Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection

Secure services

With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs

With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies

Industry standard management

Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN

Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support

Industry leading warranty

NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty

90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement

The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity.

These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.

HPE FlexNetwork 5130 EI switch with 24 1GbE, power-over-Ethernet-plus ports (up to 370W), 2 SFP+ ports, and 2 10GbE ports

Features

Scalable managed switches with static layer 3 routing, RIP and 9 chassis IRF stacking.
Four fixed 10GbE uplinks (SFP+ and 10GBASE-T).
PoE+ models for voice, video and wireless.
Limited Lifetime Warranty.
Scalable and Flexible Access Layer Switches

The HPE FlexNetwork 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static L3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and Energy Efficient Ethernet power savings.

Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.

Four fixed 10GbE uplinks (SFP+ and 10GBASE-T) deliver performance for bandwidth intensive applications.

Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network.

Limited Lifetime Warranty and no software licensing required.

Improved Quality of Service with Traffic Management

The HPE FlexNetwork 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information, applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.

Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.

Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

Comprehensive Security Control

The HPE FlexNetwork 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.

ACLs provide IP Layer 2 to Layer 4 traffic filtering, supports global ACL, VLAN ACL, port ACL, and IPv6 ACL.

Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.

Single View of the Network

The HPE FlexNetwork 5130 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Aruba 2930F 24G Poe+ 4Sfp Switch - 24 Ports - L3 - ManagedThe Aruba 2930F 24G Poe+ 4Sfp Switch - 24 Ports - L3 - Managed  is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These convenient Layer 3 network switches include built-in uplinks and power so are simple to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Aruba 2930F Key Features

Aruba Layer 3 switch series with VSF stacking, static, RIP and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Supports advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Software-defined ready with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning
A powerful Aruba ProVision ASIC delivers performance, robust feature support and value with programmability for the latest applications. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required. The Aruba 2930F Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Provisioning. The robust Layer 3 feature set includes a limited lifetime warranty.

Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A)The Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) is a switch that is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from Aruba Central, you can quickly set up remote branch sites with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and flexibility to meet the needs of today and tomorrow’s network programmability and automation requirements. Stacking with Virtual Switching Framework (VSF) provides simplicity and scalability. The 2930F supports built-in 1GbE or 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required.

Aruba 2930F 24G PoE+ 4SFP+ Switch (JL255A) Key Features

Aruba Layer 3 switch series with VSF stacking, static, Rip and Access OSPF Routing, Dynamic Segmentation, ACLs, and robust QoS
Consistent wired/wireless experience with Aruba AirWave and Aruba ClearPass Policy Manager
Convenient built-in 1GbE or 10GbE uplinks and up to 740 W PoE+
Ready for the software defined network with REST APIs and OpenFlow support
Simple deployment with Zero Touch Provisioning and cloud-based Aruba Central support
The Aruba 2930F Switch Series provides a convenient and cost- effective access switch solution that can be quickly set up with Zero Touch Provisioning and built-in 10GbE uplinks. The robust Layer 3 feature set includes a limited lifetime warranty.

The Aruba 3810 Switch Series provides performance and resiliency for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high-speed 802.11ac devices, this advanced Layer 3 switch delivers a better application experience with low latency, virtualisation with resilient stacking technology, and line rate 40GbE for plenty of back haul capacity. The Aruba 3810 is easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager, Aruba AirWave and cloud-based Aruba Central.

Expandable high-end campus access switch with 24x Gigabit PoE+ ports and an open module slot for more high speed connections.
This model has 24x 10/100/1000 PoE+ ports together with 1x open module slots and a stacking module slot. Power supplies are ordered separately. When matched with the correct dual power supplies, supports up to 840W of PoE+ power across 48 ports.

(24) RJ-45 autosensing 10/100/1000 PoE+ ports
Ports 1 - 24 support MACSec
(1) open module slot
Supports a maximum of 4 SFP+ ports or 1 40GbE ports, with optional module

Features:

The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow.
The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with very low latency, increased packet buffering, and adaptive power consumption. The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements.
The Aruba 3810 Switch Series supports Aruba ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network.


Performance and Power for the Digital Workplace The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow.

HPE Smart Rate ports support multi-gigabit Ethernet speeds (1, 2.5, 5, and 10 gigabit Ethernet) on existing cabling for cost-effective and convenient network upgrades with no rip and replace of cabling.

Optimised for the digital workplace with unified management and security tools such as Aruba ClearPass Policy Manager, Aruba Airwave and Aruba Central. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment.

Rightsizes deployment and back haul capacity with modular 10GbE and 40GbE uplinks. Full PoE+ provisioning on 48-ports. Dual, redundant, hot-swappable power supplies and innovative backplane stacking technology delivers resiliency and scalability in a convenient 1U form factor.

Advanced Layer 2 and 3 feature set with OSPF, IPv6, IPv4 BGP, robust QoS and policy-based routing are included with no software licensing. Built-in programmable and easy to use REST API interface provides configuration automation for Mobile-first campus networks.


Resiliency and High Availability You Can Depend On The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with very low latency, increased packet buffering, and adaptive power consumption.

Backplane stacking technology delivers high-performance stacking with up to 336 Gb/s of stacking throughput and increased resiliency. Up to ten Aruba 3810 switches can be stacked in a ring topology or up to five can be stacking in a mesh topology.

Dual hot-swappable power supplies provide power and allow swapping of modules on the fly to reduce impact on the network availability. More performance with selectable queue configurations and associated memory buffering that best meets requirements of prioritised network applications.

Selectable queue configurations enables increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications.

Uninterrupted switching and routing for improved application experience and enhanced L3 availability. Supports virtual router redundancy protocol (VRRP) allowing groups of two routers to dynamically back each other up to create highly available router environments in both IPv4 and IPv6 networks.


Trusted Security with Unmatched Quality of Service The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements.

Flexible traffic controls, such as policy-based routing, QoS, and ACLs, to manage end-to-end application priorities for improved user experience.

Enhanced security and policy-driven application authentication with concurrent 802.1X, MAC and Web Authentication modes. Prevent unwanted traffic with advanced distributed denial of service (DDOS) protection, such as DHCP Snooping, IP Source Guard, and ARP Protection.

Powerful multilevel-access security controls, such as role-based management, configurable password complexity, RADIUS/TACACS+, and SSH for improved security and control change management access.

Tunneled Node to transport network traffic on a per-port basis to Aruba controller with authentication and network policies applied and enforced at the controller. Industry standard MACsec provides switch-to-switch link level security.


Simplify with Unified Management The Aruba 3810 Switch Series supports Aruba ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network.

Supports Aruba AirWave and cloud-based Aruba Central to provide common platform for zero-touch provisioning, management, and monitoring for wired and wireless network devices.

Supports both cloud-based Central and on-premise AirWave with the same hardware ensuring change of management platform without ripping and replacing switching infrastructure.

RMON, XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.

Aruba Instant On 1830 An affordable solution for cost-sensitive small businesses. The Aruba Instant On 1830 Switch Series is an affordable, easy-to-use, smart-managed switch solution for small businesses looking for cost-effective ways to keep up with evolving networking demands.

Main Features

Fast 802.11ax, 2X2:2
Wi-Fi Certified 6™ (Wi-Fi 6)
MU-MIMO performance
Smart Mesh Wi-Fi support
Built-in Wi-Fi router/gateway functionality
Integrated Bluetooth
Easy-to-use web and mobile app for setup and management
Secure Guest Wi-Fi with simple setup
Application classification, control and visibility
Product Specification

Gigabit Copper Ports 24; Class 4 (ports 1 -12) Uplinks 2 SFP 1GbE ports Dimensions 253.0(D) x 443.0(W) x 43.9(H) mm Weight 7.65 lb (3.47 kg) Throughput (Mpps) 38.68 Mpps Switching capacity 52 Gbps Reliability MTBF (years) 96.6 Maximum power rating 100-127V: 244.6W
200-220V: 237.2W Warranty Limited Lifetime Warranty Perfect For:

Home Office

Coffee Shop

Tech Start-Ups

Dental Offices

Aruba Instant On 1830 has all the features you need right out of the box

Power over Ethernet (PoE) support

The 1830 Switch Series is ready to deploy in 8-, 24-, and 48-port for non-PoE and Class 4 PoE models. Up to 30 W PoE power delivery is available for Class 4 PoE devices. With PoE and non-PoE ports supported in the same PoE model, these switches are ideal for the most cost-efficient environments.

Flexible management options

Easily deploy and manage 1830 switches using two management modes - Instant On cloud management (access via mobile app and/or web portal) or the local web GUI.

Integrated security features

Prevent unauthorized access and protect your business data with advanced security features like VLANs, automatic Denial-of-service protection, Global Storm Control, TPM (Trusted Platform module) based security and more.

Optimal energy efficiency

Cut operating costs and reduce your environmental footprint with 1830 switches. Energy Efficient Ethernet (IEEE 802.3az), auto-port shutdown, energy-efficient cooling support and fanless design all help maintain operating temperatures, reducing excess noise and power consumption.

SFP fibre connectivity

Two (2) and four (4) dedicated 1G SFP fiber ports on 24- and 48-port models respectively eliminate traffic bottlenecks across your network. Fiber connectivity provides higher uplink bandwidth and performance across longer distances than copper cabling can support.

PoE Powered Device (PD) enabled

Simplify deployments in hard-to-wire areas by the PD powered 8-port non-PoE model that can be powered from an external PoE switch or an external injector, offering greater flexibility for space-constrained environments by eliminating the need for additional power outlets and wiring.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone/Chat Support

Instant On Community

Smart and scalable

Aruba Instant On 1960 Switch Series are advanced, smart-managed, stackable Gigabit switches for growing businesses needing the highest performance to support bandwidth-demanding applications.

Aruba Instant On 1960 - JL806A Features

24 10/100/1000 PoE ports, 2 SFP+ 10GbE ports and 2 10GBASE-T ports
Total 370 W PoE Power (Up to 240 W of Class 6 or 370 W of Class 4 PoE)
95 Mpps Throughput Capacity
128 GB Switching capacity
65.3 Reliability MTBF (years)
Dimensions: 350.5(D) x 442.5(W) x 43.95(H) mm
Weight: 8.7 lb (3.9 kg)
Limited Lifetime Warranty
Perfect For:

Training Centres

Medical Clinics

Hospitality

Tech Start-Ups

The Aruba Instant On 1960 has the features you want for high-density environments

High-performance 10 gig connectivity

For environments with heavy bandwidth needs, 10GBase-T and SFP+ uplink ports deliver lightning-fast network speeds and eliminate traffic bottlenecks. 24 and 48-port Gigabit (PoE and non-PoE) models and a 12-port aggregation switch provide options for both flexible and affordable deployment.

Stack up to four (4) 1960 switches

Simplify network management by stacking up to (four) 4 1960 (access and aggregation) switches and managing them through a single management interface. You get up to 288 ports, including 16 10G uplink ports, for high-density environments, as well as flexibility for future network expansion.

Easy to use cloud-managed stacking

In a few simple steps, set up and configure a stack with the Aruba Instant On mobile app. You can manage the stack and ports remotely, and you’ll minimize network downtime - if the master switch within 1960 Series stack fails, another switch takes over, keeping your network up and running.

Future-proof your network

Advanced switching capabilities like Layer 3 IPv4, IPV6 static routing, ACLs, and Spanning Tree Protocols support apps and devices you have today, as well as those you may add in the future. And True Stacking makes it easy to configure, manage, and troubleshoot physical switches as one single entity, helping scale the network as your business grows.

PoE Over Ethernet (PoE) support

The 1960 switches support Class 4 and Class 6 PoE on selected ports. Up to 30 W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60 W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video enabled IP-phones.

Robust security

Protect your business data and keep unauthorized users off the network with advanced security features like IEEE 802.1X, MAC authentication, VLANs, Network Access Control (ACL), Port Security, DHCP snooping, ARP attack prevention and RADIUS authentication.

This Model Includes:

Limited Lifetime Warranty

24/7 Phone and Chat Support

Instant On Community

Build a reliable, easy-to-use business network at an affordable price with Cisco Business 250 series Gigabit smart switches . From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business . Managed through Cisco Business Dashboard and mobile app , the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.


Model CBS250-24P-4G Specifics:
Network ports 24 x 1G


Power over Ethernet (PoE) PoE+ (195W)


Uplink ports 4 x 1G SFP


Fan Fanless


Power supply Internal

Warranty Limited lifetime warranty

Cisco Business 250 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
access control list (ACL)
Quality of service (QoS)
IPv4/IPv6 static routing
An energy-efficient solution
The Cisco Business 250 Series is the next generation of affordable smart switches that combine powerful performance and reliability with a complete suite of the features you need for a solid business network. These switches provide flexible management options, comprehensive security capabilities and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, Cisco Business 250 Series Smart Switches provide the ideal solution at an affordable pricing point.

A powerful foundation for the basic business network Cisco Business 250 Series Smart Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don’t. With Cisco Business 250 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals.

Network management:

On-device UI, Cisco Business Dashboard and mobile app
Business applications

High-speed desktop connectivity
Flexible wireless connectivity
Unified communications
Features and benefits:

Easy configuration and management
Cisco Network Plug and Play solution
Configuration wizards simplify the most common configuration tasks and provide the ultimate tool for anyone to set up and manage the network.
Reliability and performance
Layer 3 static routing
Network security
Cisco Business Dashboard For more information, visit www.cisco.com/go/cbd

Build a reliable, easy-to-use business network at an affordable price with Cisco Business 250 series Gigabit smart switches . From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business . Managed through Cisco Business Dashboard and mobile app , the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.


Model CBS250-24P-4G Specifics:
Network ports 24 x 1G


Power over Ethernet (PoE) Yes - 195 W Budget     


Uplink ports 4 x 10G SFP+


Fan Fanless


Power supply Internal - 100 to 240V, 50 to 60Hz

Warranty Limited lifetime warranty

Cisco Business 250 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
access control list (ACL)
Quality of service (QoS)
IPv4/IPv6 static routing
An energy-efficient solution
The Cisco Business 250 Series is the next generation of affordable smart switches that combine powerful performance and reliability with a complete suite of the features you need for a solid business network. These switches provide flexible management options, comprehensive security capabilities and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, Cisco Business 250 Series Smart Switches provide the ideal solution at an affordable pricing point.

A powerful foundation for the basic business network Cisco Business 250 Series Smart Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don’t. With Cisco Business 250 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals.

Network management:

On-device UI, Cisco Business Dashboard and mobile app
Business applications

High-speed desktop connectivity
Flexible wireless connectivity
Unified communications
Features and benefits:

Easy configuration and management
Cisco Network Plug and Play solution
Configuration wizards simplify the most common configuration tasks and provide the ultimate tool for anyone to set up and manage the network.
Reliability and performance
Layer 3 static routing
Network security
Cisco Business Dashboard For more information, visit www.cisco.com/go/cbd

Build a reliable, easy-to-use business network at an affordable price with Cisco Business 250 series Gigabit smart switches . From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business . Managed through Cisco Business Dashboard and mobile app , the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.


Model CBS250-24FP-4G Specifics:
Network ports 24 x 1G


Power over Ethernet (PoE) PoE+ (370W)


Uplink ports 4 x 1G SFP


Fan 1 Fan


Power supply Internal

Warranty Limited lifetime warranty

Cisco Business 250 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
access control list (ACL)
Quality of service (QoS)
IPv4/IPv6 static routing
An energy-efficient solution
The Cisco Business 250 Series is the next generation of affordable smart switches that combine powerful performance and reliability with a complete suite of the features you need for a solid business network. These switches provide flexible management options, comprehensive security capabilities and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, Cisco Business 250 Series Smart Switches provide the ideal solution at an affordable pricing point.

A powerful foundation for the basic business network Cisco Business 250 Series Smart Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don’t. With Cisco Business 250 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals.

Network management:

On-device UI, Cisco Business Dashboard and mobile app
Business applications

High-speed desktop connectivity
Flexible wireless connectivity
Unified communications
Features and benefits:

Easy configuration and management
Cisco Network Plug and Play solution
Configuration wizards simplify the most common configuration tasks and provide the ultimate tool for anyone to set up and manage the network.
Reliability and performance
Layer 3 static routing
Network security
Cisco Business Dashboard For more information, visit www.cisco.com/go/cbd

Build a reliable, easy-to-use business network at an affordable price with Cisco Business 250 series Gigabit smart switches . From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business . Managed through Cisco Business Dashboard and mobile app , the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.


Model CBS250-24FP-4X Specifics:
Network ports 24 x 1G


Power over Ethernet (PoE) PoE+ (370W)


Uplink ports 4 x 10G SFP+(10 Gigabit)


Fan 1 Fan


Power supply Internal

Warranty Limited lifetime warranty

Cisco Business 250 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
access control list (ACL)
Quality of service (QoS)
IPv4/IPv6 static routing
An energy-efficient solution
The Cisco Business 250 Series is the next generation of affordable smart switches that combine powerful performance and reliability with a complete suite of the features you need for a solid business network. These switches provide flexible management options, comprehensive security capabilities and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, Cisco Business 250 Series Smart Switches provide the ideal solution at an affordable pricing point.

A powerful foundation for the basic business network Cisco Business 250 Series Smart Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don’t. With Cisco Business 250 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals.

Network management:

On-device UI, Cisco Business Dashboard and mobile app
Business applications

High-speed desktop connectivity
Flexible wireless connectivity
Unified communications
Features and benefits:

Easy configuration and management
Cisco Network Plug and Play solution
Configuration wizards simplify the most common configuration tasks and provide the ultimate tool for anyone to set up and manage the network.
Reliability and performance
Layer 3 static routing
Network security
Cisco Business Dashboard For more information, visit www.cisco.com/go/cbd

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-24P-4G Specifics:
Network ports 24 x 1G


Uplink ports 4 x 1G SFP


Power over Ethernet (PoE) PoE+ (195W)

Stacking N/A


Fan Fanless


Power supply Internal
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-24FP-4G Specifics:
Network ports 24 x 1G


Uplink ports 4 x 1G SFP


Power over Ethernet (PoE) PoE+ (370W)

Stacking N/A


Fan 1 Fan


Power supply Internal
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-24P-4X Specifics:
Network ports 24 x 1G


Uplink ports 4 x 10G SFP+(10 Gigabit)


Power over Ethernet (PoE) PoE+ (195W)

Stacking Stackable up to 4 units


Fan Fanless


Power supply Internal
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Cloud-Managed Switching for Small Branch and Office Layer 2 access switches with 10G SFP+ uplinks, designed for small branch deployments Cisco Meraki MS125 switches provide Layer 2 access switching ideal for branch and campus deployments. The MS125 series features a variety of power options designed to meet the diverse needs of large enterprise networks.

Cisco Meraki switches are built from the ground up for cloud management without compromising any of the power and flexibility traditionally found in enterprise-class switches. To bring up a Meraki switch, simply plug it in. Meraki switches do not require CLI for switch configuration or port management.

All Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, simply plug it in. Meraki switches do not require CLI for switch configuration or port management.

Meraki's centralized management platform gives administrators granular visibility into their network. Our dashboard helps you keep track of every configuration change in your network with our detailed event and change logs.

Main Features Converged voice, video and data environments

The Meraki switch family is designed to unify data, voice, and video onto a single IP backbone. All Meraki switches support rich quality- of-service (QoS) functionality for prioritizing data, voice, and video traffic. The switches support eight class-ofservice (CoS) queues on every port, enabling them to maintain end-to-end traffic prioritization.

PoE models provide power to VoIP telephones, IP security cameras, wireless access points (APs), and other IP devices. In addition, using CDP and LLDP, PoE power is intelligently budgeted to maximize the number of PoE clients supported.

Application layer visibility

Meraki switches include integrated Layer 7 fingerprinting without the need to purchase additional modules or services. Identify hundreds of applications from business apps to BitTorrent and YouTube.

User fingerprinting allows administrators to quickly identify individual users by device and tune network resources for optimum performance.

Unified software architecture

Meraki switches run the same operating system used by all of our products, which allows us to deliver a consistent user experience for network management.

When connected, new MS125 switches automatically reach out to the Meraki cloud and download the most current configuration. Future updates can be user-scheduled, ensuring the network is kept up-to-date with bug fixes, security updates, and new features.

Application-aware traffic shaping

The MR70 includes an integrated Layer 7 packet inspection, classification, and control engine, enabling you to set QoS policies based on traffic type. Prioritize your mission critical applications, while setting limits on recreational traffic, e.g., peer-to-peer and video streaming.

Features and Capabilities Branch and campus access

PoE and PoE+ models available for device level powering

Quality-of-Service (QoS) to prioritize mission critical traffic such as voice and video

Voice VLAN support for simplified VoIP deployments

CDP/LLDP with detailed neighbor discovery and visibility

Port Mirroring support for monitoring network traffic at line rate

IGMP Snooping to optimize network performance for multicast applications

Link Aggregation Control Protocol (LACP) for high-capacity trunking

Network troubleshooting and automation

Virtual Stacking helps IT admins make configuration changes to hundreds of switch ports in seconds with our intuitive dashboard interface

Configuration templates for rapid, zero-touch provisioning and auditing of all sites

Network Topology for automatic and interactive network mapping

Remote cable testing, packet capture and client discovery

Automatic and scheduled firmware upgrades for the complete network

  Network security

IEEE 802.1X, MAB, and Hybrid authentication support for wired access control with RADIUS server monitoring

ACL support (IPv4 & IPv6) and MAC whitelisting

Single-Host/Multi-Domain/Multi-Host/Multi Authentication

Change of Authorization (CoA) and RADIUS accounting support

DHCP snooping to prevent users from adding unauthorized DHCP servers on the network

Rapid spanning tree, BPDU guard, root guard, loop guard, UDLD and other safeguards to help prevent misconfigurations and reduce convergence time

Per-port VLAN configuration

Multiple administrative roles with sophisticated security policy management

 

Layer 3 switch with optional mGig/UPoE/802.3bt Adaptive policy device and app security exclusive to the MS390. The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks.

The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic.

By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.

Main Features Maximize your bandwidth

MS390-24: 24 1GbE, MS390-24P: 24 1GbE PoE+,

MS390-24U: 24 1GbE UPoE, MS390-24UX: 24 mGbE UPoE

Two 40G or four/eight 10G modular fiber uplinks

480 Gbps of physical stacking, up to eight units

Power/PoE

All models include a power supply

Modular power supply/fans

StackPower

Enterprise hardware and support

Reliable platform with 24/7 Meraki support

1RU rack-mountable

Flexible mounting options

Non-blocking switch fabric

Cloud managed

Email alerts for switch management

Remote troubleshooting tools, zero-touch provisioning

Manage ports from a GUI-based dashboard; per-port and per-client usage statistics

Secure, user-scheduled firmware updates

Features and Capabilities Management

Managed via Cisco Meraki Dashboard

Zero-touch remote provisioning (no staging needed)

Basic configuration capability via local management page

Detailed historical per-port and per-client usage statistics

Operating System, device, and hostname fingerprinting

Automatic firmware upgrades with scheduling control

SNMP and SYSLOG support for integration with other network management solutions

Security

Integrated multi-factor authentication for Dashboard management

Role-based access control (RBAC) with granular device and configuration control

Corporate wide password policy enforcement

IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing

Single-Host/Multi-Domain/Multi-Host/Multi Authentication

Port security: Sticky MAC, MAC whitelisting

DHCP snooping, detection and blocking, Dynamic ARP Inspection

IPv4 and IPv6 ACLs

Secure Connect

Adaptive Policy

  Remote Diagnostics

Email, SMS and Mobile push notification alerts

Ping, traceroute, cable testing, and link failure detection with alerting

Dynamic and interactive network discovery and topology

Combined event and configuration change logs with instant search

Remote packet capture

Stacking

Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models

Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration

StackPower in a ring topology supporting upto 4 switches

Faster convergence

  Ethernet Switching Capabilities

802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping)

802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)

Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST)

STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD

802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)

Dynamic ARP Inspection to prevent man-in-the-middle attacks

802.3ad Link aggregation with up to 8 ports per aggregate, Multichassis aggregates supported on stacked switches

Broadcast storm control

Port mirroring

IGMP snooping for multicast filtering

MAC Forwarding Entries: 32K

 

Layer 3 switch with optional mGig/UPoE/802.3bt Adaptive policy device and app security exclusive to the MS390. The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks.

The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.

Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group's traffic.

By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.

By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.

Main Features Maximize your bandwidth

MS390-24: 24 1GbE, MS390-24P: 24 1GbE PoE+,

MS390-24U: 24 1GbE UPoE, MS390-24UX: 24 mGbE UPoE

Two 40G or four/eight 10G modular fiber uplinks

480 Gbps of physical stacking, up to eight units

Power/PoE

All models include a power supply

Modular power supply/fans

StackPower

Enterprise hardware and support

Reliable platform with 24/7 Meraki support

1RU rack-mountable

Flexible mounting options

Non-blocking switch fabric

Cloud managed

Email alerts for switch management

Remote troubleshooting tools, zero-touch provisioning

Manage ports from a GUI-based dashboard; per-port and per-client usage statistics

Secure, user-scheduled firmware updates

Features and Capabilities Management

Managed via Cisco Meraki Dashboard

Zero-touch remote provisioning (no staging needed)

Basic configuration capability via local management page

Detailed historical per-port and per-client usage statistics

Operating System, device, and hostname fingerprinting

Automatic firmware upgrades with scheduling control

SNMP and SYSLOG support for integration with other network management solutions

Security

Integrated multi-factor authentication for Dashboard management

Role-based access control (RBAC) with granular device and configuration control

Corporate wide password policy enforcement

IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing

Single-Host/Multi-Domain/Multi-Host/Multi Authentication

Port security: Sticky MAC, MAC whitelisting

DHCP snooping, detection and blocking, Dynamic ARP Inspection

IPv4 and IPv6 ACLs

Secure Connect

Adaptive Policy

  Remote Diagnostics

Email, SMS and Mobile push notification alerts

Ping, traceroute, cable testing, and link failure detection with alerting

Dynamic and interactive network discovery and topology

Combined event and configuration change logs with instant search

Remote packet capture

Stacking

Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models

Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration

StackPower in a ring topology supporting upto 4 switches

Faster convergence

  Ethernet Switching Capabilities

802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping)

802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)

Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST)

STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD

802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)

Dynamic ARP Inspection to prevent man-in-the-middle attacks

802.3ad Link aggregation with up to 8 ports per aggregate, Multichassis aggregates supported on stacked switches

Broadcast storm control

Port mirroring

IGMP snooping for multicast filtering

MAC Forwarding Entries: 32K

 

Cisco Meraki MS120-24P switches provide Layer 2 access switching, 4 x 1GbE SFP ports for fibre uplink and PoE+ support, making them ideal for ideal for branch and campus deployments.



Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files - or pre-staging.
In addition, Meraki’s centralised management system gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.

Features:

Cloud management has a number of benefits that make it easier to build networks large and small:

24 Port Gigabit Ethernet Switch with 4 × SFP for 1G uplink, non-shared.
370 watt PoE budget with PoE+ support and dynamic power allocation for powering access points, phones, cameras, and other PoE-enabled devices
56Gbps non-blocking switch
8 dedicated QoS queues for converged voice, video, and data applications
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Powerful live tools such as packet capture and cable test to isolate and troubleshoot network issues
Alerts to indicate power loss, downtime, excessive Layer 1 issues, and configuration changes
Role-based administration and automatic, scheduled firmware upgrades over the web
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Lifetime hardware warranty and advanced replacement at no additional cost






Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.





Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.





Layer 7 Application and Client Visibility Meraki is the only switch to include integrated Layer 7 fingerprinting. Our powerful, built-in traffic classification features can identify hundreds of applications from business apps to BitTorrent and YouTube.

User fingerprinting with Google-like search allows administrators to easily identify and control individual users, PCs, Macs, iPads, Android devices, and other device types. This unprecedented visibility allows optimising of network resources and maintaining an optimal, secure network that always performs.





Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective.





QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.





Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.





Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events.

The Cisco Meraki MS210-24P-HW is a 24 Port PoE Gigabit Switch providing Layer 2 access switching for branch and small campus locations. The MS210-24P-HW includes 4 x 1G SFP uplinks and physically stacks with the MS225 to gain access to its 10G uplink. This family also supports an optional, rack-mountable PSU (Cisco RPS-2300) for power redundancy requirements



Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. Cisco Meraki switches are managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files - or pre-staging.
In addition, Meraki’s centralised management system gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.

Features:

Cloud management has a number of benefits that make it easier to build networks large and small:

24 Port Gigabit Ethernet Switch with 4 × SFP for 1G uplink, non-shared.
370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Built-in dual stacking interfaces with up to 80G bandwidth
Single pane of glass management of distributed switch deployments, wireless APs, and firewalls across multiple sites through the browser.
Low power consumption and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Layer 7 OS, client, and host-name fingerprinting.
Access to 10G uplink by physically stacking with the MS225
E-mail and SMS (text) alerts upon power loss, downtime, or configuration changes.
6 dedicated QoS queues for converged voice, video and data applications
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

Cloud Managed Stackable Access Switch

The Cisco Meraki MS225-24P is a 24 port PoE+ switch which provides layer 2 access switching and is ideal for deploying to branch locations. With stacking capabilities and 10G SFP+ uplinks, performance is guaranteed. This family also supports an optional, rack-mountable remote PSU (Cisco RPS-2300) for power redundancy requirements

Cisco Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches.

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch.

Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

True zero-touch device provisioning
Virtual stacking: manage up to thousands of ports from a single pane of glass.
Application layer visibility with automatic operating system, client, and hostname fingerprinting.
Powerful Live Tools such as packet capture and cable test to isolate and troubleshoot network issues.
Alerts upon power loss, downtime, or configuration changes.
Role-based administration and automatic, scheduled firmware upgrades over the web.
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Features:

24 Port Gigabit Access switching
4 x 10G SFP+ uplink interface
Built-in dual stacking interfaces with up to 80G bandwidth
Non-blocking switch backplane with up to 128 Gbps bandwidth support
8 dedicated QoS queues for converged voice, video, and data applications
Up to 370 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones, cameras, and other PoE-enabled devices
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

Cloud Managed Stackable Access Switch

The Cisco Meraki MS250-24P 24 Port PoE+ stackable switch provides reliable access switching ideal for deploying in branches and small campuses. With stacking capabilities and 10G SFP+ uplinks, redundancy and performance are guaranteed. This Cisco Meraki MS250-24P  also supports redundant, field-replaceable power supplies for mission critical networks.

Cisco Meraki switches are built from the ground up to be easy to manage without compromising any of the power and flexibility traditionally found in enterprise-class switches. 

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch. 
Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

True zero-touch device provisioning
Virtual stacking: manage up to thousands of ports from a single pane of glass.
Application layer visibility with automatic operating system, client, and hostname fingerprinting.
Powerful Live Tools such as packet capture and cable test to isolate and troubleshoot network issues.
Alerts upon power loss, downtime, or configuration changes.
Role-based administration and automatic, scheduled firmware upgrades over the web.
Regular feature updates and enhancements delivered on demand from the Meraki cloud.
Features:

24 Port Gigabit Access switching
Maximum PoE output: 370 W PoE/PoE+ available simultaneously on all ports
Intelligent PoE power allocation based on device advertisement (LLDP)
4 x 10G SFP+ uplink interface
Built-in dual stacking interfaces with up to 80G bandwidth
Field replaceable power
Non-blocking switch backplane with up to 128 Gbps bandwidth support
8 dedicated QoS queues for converged voice, video, and data applications
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

Cloud Managed Stackable Access Switch

The Cisco Meraki MS350-24P 24 Port Gigabit Switch provides 10G SFP+ uplinks and high-performance access switching for large enterprise and campus networks. The switch includes PoE/PoE+ support, highly scalable Layer 3 routing and modular power/fans for mission-critical networks.

The Meraki MS is managed through an elegant, intuitive cloud interface, rather than a cryptic command line. To bring up a Meraki switch, just plug it in; there’s no need for complicated configuration files, or even direct physical access to the switch. 
Meraki’s centralised management gives administrators deep visibility into the network and how it’s used. See which switches are near capacity across hundreds of sites. Find all configuration changes made by a certain person with instant search.



Industry Leading Cloud Management

Cloud management has a number of benefits that make it easier to build networks large and small:

Automatic email alerts from power loss, downtime, excessive Layer 1 errors, or configuration changes
Powerful remote diagnostic tools such as packet capture to help isolate and troubleshoot network issues
Role-based administration
Firmware upgrades and enhancements from the Meraki cloud
Virtual Stacking enables switch port configuration changes on the dashboard interface without the need to physically stack switches
Incredible network transparency with application, operating system, client, and hostname visibility
Zero-touch provisioning for rapid deployment across sites
Features:

24 Port Gigabit Access switching with 24 PoE+ Ports
PoE budget of 370W, up to 30W per port
4 x 10G SFP+ uplink interface
Dual stacking interfaces with up to 160 Gbps of bandwidth
Support for field replaceable, redundant power supplies
Non-blocking switch backplane with up to 272 Gbps bandwidth support
6 configurable QoS queues for converged voice, video, and data applications s
Low power consumption, quiet acoustic design, and shallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Integrated mounting brackets for rack and desk mounting
Lifetime hardware warranty and advanced replacement at no additional cost








Centrally Managed from the Cloud The Cisco Meraki Cloud Networking architecture enables plug and play branch deployments and provides centralised visibility and control across any number of distributed locations.

The Cisco Meraki MS is the industry’s first cloud managed switch, combining the benefits of cloud-based centralised management with a powerful, reliable access platform.

With cloud management, thousands of switch ports can be configured and monitored instantly, over the web. Provision remote sites without on-site IT, deploy network-wide configuration changes, and easily manage campus and distributed networks without training or dedicated staff.



Virtual Stacking Meraki MS Switches feature virtual stacking — an industry first — that allows management of thousands of switch ports as one, without requiring a physical connection between switches.

Quickly find and configure switch ports across your entire network, even those in geographically-distributed locations. Easily configure ports for access devices, assign voice VLANs, control PoE, and more, with a few simple clicks and without complex CLI instructions.

Virtual stacking is built-in to all Meraki MS Switches, with no need for extension modules, proprietary cables, or extra configuration. Simply log in to the Cisco Meraki dashboard and manage the entire access switch infrastructure without concern for their interconnectivity.



Layer 7 Application and Client Visibility Meraki MS Switches are the industry's only switches featuring integrated Layer 7 application and client fingerprinting and analysis. Hundreds of applications are automatically identified and reported, from business apps to BitTorrent and YouTube, so administrators can see where resources are spent.

Device fingerprinting with Google-like search allows administrators to easily find and identify individual users, iPads, Androids, and other devices. Search for devices across the entire network right from the Meraki dashboard, no matter which switch a device connects to.



Layer 3 Scalability & Failover Quickly scale growing networks while ensuring redundancy for critical switch infrastructure with Meraki layer 3 switches. Intuitive, dynamic routing configurable in the dashboard simplifies management by removing complex command line interfaces. Traffic flow is optimised at line rate without sacrificing deep visibility into client devices and application use. Deploy ACLs directly on MS switches to secure boundaries between VLANs, hosts, services, and the Internet.

In addition to dynamic routing, layer 3 Meraki MS switches support VRRP for warm spare failover, ensuring immediate recovery of gateway responsibilities—avoiding downtime and client disruption.




QoS for Voice and Video Deploy latency-sensitive applications such as voice and video by guaranteeing network performance. Voice and QoS features such as per-VLAN and protocol-based prioritisation, as well as flexible QoS assignments, give intuitive, granular control.

Intelligent use of LLDP on the network makes deploying devices such as VoIP phones painless. Simply select a VLAN for voice in the dashboard, and selected ports will accept tagged traffic on the voice VLAN. The port also uses LLDP advertisements to recommend devices use that VLAN for voice traffic.



Network Topology Meraki MS Switches include dynamic network topology that automatically maps network architectures, showing how Meraki security, switching, and wireless devices are connected.

Quickly see the status of the devices in your network, find specific devices by name or tags, see how many clients traverse links, and see where traffic flows over the network.

Built-in network topology requires no additional hardware or software.



Remote Live Tools and Alerts MS Switches make powerful live tools available for remote troubleshooting at any time. From infrastructure uptime and performance testing to device troubleshooting, live tools simplify day-to-day network administration and dramatically shorten time to resolution.

Built-in Ethernet cable testing no longer requires an excursion to one or more switch closets just to verify cable integrity. Simply select a switch port, run a cable test, and see results right in the dashboard, even if there is no device connected on the other end.

Each Meraki MS is automatically monitored 24×7 via the cloud. Email and text message alerts are configurable to immediately notify administrators of configuration changes, switch downtime, and even per-port disconnection events



Enterprise Security Extending security down to the port level has never been easier. MS Switches integrate seamlessly with enterprise-grade security systems using 802.1X. Define access policies, segregate guest devices, and quarantine entire environments right from the dashboard.

Applying policies on many ports takes just a few clicks — even if the ports are spread across many switches. Simply search to find the ports of interest, click to apply the desired policies, and save your changes. Policies are pushed immediately to the desired ports.

Seamless firmware updates, two factor authentication, and other built-in protections make secure, PCI and HIPAA-compliant networks easy and cost effective

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
370W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 370W
Available PoE power with additional secondary power supply: 740W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.

Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.

As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations.

With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.





Catalyst 9200 with 24 Gigabit PoE+ Ports
4 x 1/10 G modular uplinks
370W PoE+ Budget
FRU Redundant Power Supplies and Fans


Product Highlights

24 ports of full Power over Ethernet Plus (PoE+) capability
Available PoE power with single primary power supply on: 370W
Available PoE power with additional secondary power supply: 740W
Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks
Flexible downlink options with data or PoE+
Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps
ADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure
Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems
Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access
Advanced network monitoring using Full Flexible NetFlow
Cisco Software-Defined Access (SD-Access):
Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE)
Network assurance and improved resolution time through Cisco DNA Center
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry
ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
Features:

Secure:

Cisco's best-in-class security portfolio is anchored by Talos, Trustworthy Solutions, MACsec encryption, and segmentation. Get advanced security features that protect the integrity of your hardware, software, and all data that flows through the switch.

Always on

Catalyst 9200 Series switches provide enterprise-level resiliency, analytics, and assurance to keep your business up and running seamlessly. FRU power supplies and fans, modular uplinks, cold patching, perpetual PoE, and the industry's highest mean time between failure (MTBF) make Catalyst 9200 Series switches stand out against other switches in their class.?

IT simplicity

Get a simple web UI or Cisco DNA Center provisioning, combined with the open APIs of Cisco IOS XE and the programmability of the UADP ASIC technology. Catalyst 9200 Series switches provide simple operation now with investment protection for future innovations.

Features on Cisco Catalyst uplink switches Network Essentials Network Advantage Switch fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder Advanced switch capabilities and scale

EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF Network segmentation

VRF, VXLAN, LISP, SGT Automation

NETCONF, RESTCONF, YANG, PnP Agent, PnP Telemetry and visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN Security

MACsec-128 Cisco DNA for Switching - Subscription

A new era of secure, intelligent switching

Cisco's innovative switching solutions handle the demands of new security threats, the evolving Internet of Things (IoT), and mobility integration. Get all of these innovations with our simple, flexible software subscription suites. Cisco DNA for Switching subscriptions simplify the purchase and use of our Cisco Digital Network Architecture (Cisco DNA) capabilities.